User Manual

AXELL CSR 3604-3304 UHF REPEATER

PRODUCT DESCRIPTION AND USER’S MANUAL

5.1.2 Configure the Computer Network Parameters

Configure the computer network parameters to communicate with the Repeater. Note that

the procedure may vary slightly depending on the operating system installed on your

computer. The following procedure is for MS Windows 7.

To configure the computer’s network parameters:

1. Click the Start menu and choose Control Panel.

2. In the Control Panel, click Network and Internet.

3. Click Network and Sharing Centre and then click Local Area Connection. The Local

Area Connections Status dialog appears with the General tab displayed by default.

4. Click the Properties button. The Networking tab appears.

5. In the Items list, double-click the “Internet Protocol Version 4 (TCP*IPv4)” item.

6. The Internet Protocol Version 4 (TCP/IPv4) Properties dialog appears.

Note: The Repeater is supplied with the default IP address 192.168.1.253.