User Manual

AXELL CSR 3604-3304 UHF REPEATER

PRODUCT DESCRIPTION AND USER’S MANUAL

6.5.5 Modem Setup

NOTE: This section is relevant only if a modem is installed in the CSR repeater. If so, the SIM card

should already have been installed according to section 4.8.

The CSR can communicate over two types of modem: Packet Switched (GPRS, GSM etc.)

or Circuit Switched (PSTN/GSM). The available options depend on the modem type

installed in your unit.

Modem Setup Overview

1. The Hover on the Home page Title bar and choose Modem from the displayed icons.

The following dialog appears.

2. Verify that Remote Communication is ON.

3. Select the Device:Method – communication method. Only the options relevant to your

installed modem will be displayed. (STD:DTC = Standard AT:Data Call, ETH:TCP =

Ethernet:TCP connection)

4. Configure your communication method according to the relevant following section.

6.5.5.1 Packet Switched Modem Configuration (GSM/GPRS)

NOTE: In case the network connection is not performed properly (using GPRS), it is

necessary to telnet, SSH or serial into the controller and enter TRACE MODEM to see why

modem is not initialized (wrong / missing PIN, wrong APN etc).

 From the Remote communication menu, select ***: GPRS.

 In the GRPS area, enter the following:

 Access Point Name – customer’s Access Point name.

 Click Apply.