User Manual

AXELL CSR 3604-3304 UHF REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
38 DOC PN 3633B-UM Rev. 2.1 © Axell Wireless Ltd
6.5.5.2 Circuit Switched Modem (PSTN/GSM)
Using a circuit switched modem requires a landline connection be present at the site (for
PSTN) or a SIM card supporting this feature (for wireless GSM).
Communication Setup
1. From Device:Method select STD:DTC (Stadnard AT:DataCall).
2. In the modem initialization string type: AT+CBST=7,0,1.
3. Click Apply.
Verify Circuit Switched Modem Functionality
1. Use the ACT RCD command via the Axell Shell or via Terminal to launch a modem
restart (if logged in, restart will be performed on the first logout).
2. Dial the modem number (if PSTN) or the data number (if SIM card).
3. Verify modem LEDs are lit correctly (see section 8.1).
4. Use any ACT command using a Terminal to test connectivity and responsiveness.
6.5.5.3 SIM-card Using Single Numbering Scheme
If using SNS (Single Numbering Scheme), calls to the modem within the network are
automatically classified as DATA. However, if calling from outside the network, you must
first verify how its interfaces handle the VOICE vs. DATA bearing.
This cannot be solved at remote level. The external network administrator must provide the
above information.