User Manual

AXELL D-CSR 3302 US VHF REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
54 Doc PN 0034B-UM Rev. 2.1 © Axell Wireless Ltd
To replace the backup battery
 Set the battery switch to OFF.
 The battery is replaced by lifting the battery pack out of the crate and disconnecting the
cable.
Figure 9-2. Backup Battery Connections
9.6 Troubleshooting
In the event of a failure Axell Wireless’s support service should be contacted for advice on a
possible module replacement or other action to be taken.
CAUTION! If a shipment of a repeater back to Axell Wireless is made
within the period of guarantee the original packing must be used.
9.7 Component Replacement
None of the modules in the repeater can be replaced without removing the repeater from its
mounting and opening the cover of the repeater.
9.8 Product Disposal
Disposal of this product must be handled according to all national laws and regulations. For
detailed information regarding materials, please refer to Axell Wireless.
Connector