User`s manual

OPERATING DO’s & DON’Ts

DO:

• Change the cartridge filters regularly

• Monitor the system and keep a daily log

• Run the system, as much as possible, on a continuous basis.

• Adjust the system recovery to the recommended value

• Always feed the pump with filtered water.

DON’T

• Permit chlorine to enter or be present in the feed water.

• Shut down the system for extended periods.

• Close the throttle valve completely.

• Operate the system with insufficient feed flow.

• Operate the pump dry.

OPERATION & MAINTENANCE

The reverse osmosis process causes the concentration of impurities. The impurities

may precipitate (come out of solution) when their concentration reaches saturation

levels.

NOTE: PRECIPITATION CAN SCALE OR FOUL MEMBRANES AND MUST

BE PREVENTED.

Check your feed water chemistry and pre-treat the water and/or reduce the system’s

recovery as required. If necessary, consult with your local dealer or distributor.