User`s manual

DO NOT UNDER ANY CIRCUMSTANCE; REMOVE ANY CAUTION, WARNING,

OR OTHER DESCRIPTIVE LABELS FROM THE SYSTEM.

FEED WATER & OPERATION SPECIFICATIONS

Nothing has a greater effect on a reverse osmosis system than the feed water quality.

NOTE: IT IS VERY IMPORTANT TO MEET THE MINIMUM FEED WATER

REQUIREMENTS. FAILURE TO DO SO WILL CAUSE THE MEMBRANES TO FOUL

AND VOID THE MANUFACTURER’S WARRANTY.

OPERATING LIMITS

NOTE: HIGHER TDS AND/OR LOWER TEMPERATURES WILL REDUCE THE

SYSTEM’S PRODUCTION.

REJECTION, RECOVERY, & FLOW RATES

CT-Series reverse osmosis systems are designed to produce permeate water at the

capacities indicated by the suffix in the system’s name under the conditions listed

above. For example, the CT-4000 produces 4000 gallons per day of permeate water at

the listed operating test conditions.

The amount of total dissolved solids (TDS) rejected by the membrane is expressed as a

percentage. For example, a 98.5% rejection rate means that 98.5% of total dissolved

solids do not pass through the membrane. To calculate the % rejection, use the

following formula: