User's Manual

Answering Points (PSAPs) may not be equipped to receive GPS location information from

your device.

4. Using your 200 Series as an Alert System

Now that the battery is installed and the power adaptor is connected you are ready to use

some of the more advanced features of the Axesstel Home Alert. Your 100 Series device

has four operational modes. They are programming mode, armed mode, disarmed mode,

and alarmed mode. The following sections will describe the device’s functionality within

each of these four modes.

4.1 Programming Mode

The programming mode is used for setting the parameters of the Axesstel Home Alert

such as changing the password, adding/deleting SMS/Call numbers, setting entry/exit

delay, and adding/removing motion sensors and other accessories. The programming

mode is also used to restore the device to factory settings. To access the programming

mode please use your keypad and enter the following:

Func KeypasswordFunc Key