User's Manual

50
The setting of ‘No Exit Delay’ can only be enabled when the Axesstel Home Alert 100
Series device is armed remotely.
Example: If you want to set the exit delay to 60 seconds, then you would enter the
following:
 
4.1.13 Factory Reset
If your unit malfunctions or develops any form of software fault then it may be necessary
to perform a factory reset. To do so, please follow the instructions below. After a factory
reset is performed you will need to re-program your SMS/Call numbers and any other
parameters you have changed. You must be in the programming mode to perform this
function.
Func Key90Func Key
Func
2
8
Func