User's Manual

58
4.4 Alarmed Mode
The alarmed mode isentered when a sensor is triggered and alerts have been sent.
When one of the disarm procedures above is followed the device will be in disarmed
mode, however, the alerts will have already been issued. If no disarm command is
received within 4 minutes the Axesstel Home Alert will re-arm as described in the
continued arming section above. Under this scenario the 100 Series will revert back to
whatever armed status was previously programmed into the device and an additional
SMS will be sent. The alarmed mode can also be initiated by pressing the panic button.
4.4.1 Panic Button
Your Axesstel Home Alert features a panic button, that when pressed, will immediately
activate the siren, as well as alerting your friends and neighbors via SMS and Calls. To
activate the panic button simply press the ‘PANIC’ button which is located on your main
unit.
Panic
Please note: Once the panic button has been activated it can be disabled by the keypad
only, not remotely by SMS application nor key fob.