xEV-DO Wireless Broadband Modem AXW-D800/D1900 Axesstel 1xEV-DO Wireless Modem User Manual Rev: 0.01.01 Axesstel, Inc.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Table of Contents Introduction ____________________________________________________ 3 Features _______________________________________________________ 3 Safety Precaution________________________________________________ 4 Contents _______________________________________________________ 5 Desktop Installation______________________________________________ 6 Wall Mount Installation ___________________________________________ 6 Getting to know the modem __________
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Introduction Axesstel's 1xEv-DO Broadband Wireless Modem allows users to "get connected" to high speed data services with unprecedented ease. Powered by QUALCOMM's MSM6500 processor, these modems provide high speed data service through USB and Ethernet interfaces at rates of up to 2.4Mbps download and 153.6 Kbps upload. With RJ-45 Ethernet connection, the users can enjoy true plug and play connection without driver installation.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Safety Precaution 1. Avoid placing the unit in a dusty location, or near a source of gas or fire. 2. Do not shake, hit or drop the unit. 3. To clean the unit, use only a soft, dry cloth. The chemicals in alcohol, benzine or acetone can damage the surface of the unit. 4. Do not twist or pull the cord out of the unit. 5. Do not disassemble the phone. 6. DO NOT use the power adapter if the power cord is damaged or the unit has been dropped or damaged in any way.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Contents After opening the package, check to make sure that you have all the parts shown below. If any piece is missing or broken, please call your agent or customer service. Items marked optional may be available only on select models. 1. Main Unit 4. User’s Manual 2. Antenna (2) 5. USB Cable (Optional) 3. AC/DC Adapter and AC Cord 6.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Desktop Installation The 1xEV-DO Modem operates by receiving electricity from an electrical outlet. 1 Connect the antennas on the connectors of each side of the unit.. 2 Connect the Modem to computer using RJ-45 Ethernet Cable (CAT 5) or USB cable. 3 Move the connection selector switch to USB or Ethernet. 4 Connect the power adaptor to the DC 9V socket of the modem. 4 Plug the AC adaptor into an appropriate electrical wall outlet.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Getting to know the modem LED indications LED Power Signal Connect Ethernet Color Meaning Green Off Green Orange Red Off Green Off Green Blinking Off Power is on Power is off Excellent Signal Good Signal Poor Signal No Signal or Service is present Modem is connected to the CDMA network Modem is not connected PC connected to the Ethernet Indicates data activity No PC is connected to the Ethernet Power ON/OFF Switch There’s power switch on the front side
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Connecting Axesstel EVDO Wireless Modem Before you start 1. Make sure that your account is active. Please contact your ISP for account setup and activation information. 2. Configure your PC to obtain TCP/IP settings automatically from DHCP server feature of Wireless Modem. Refer to “TCP/IP Settings” for more information on how to set up TCP/IP settings on your PC. 3.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Connection using USB port 1. 2. 3. 4. Power off your PC. Connect the included USB Cable to USB port on your PC. Connect other end of USB Cable to USB port on Wireless Modem. Connect the included Power Adapter to Power connector of Wireless Modem. Connect the other end of Power Adapter to an electrical outlet. 5. Power on Wireless Modem. 6. Power on your PC.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 System Window Host Name: Change Password: System Upgrade: Restore Default: Reboot System: Axesstel Name of the Wireless Modem. You may change this name according to your network need. To change the password of your account, enter your old password and new password. To download new firmware. Restore all settings to factory default settings. Restart Wireless Modem.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Network IP Address: IP address of Wireless Modem. You will access Webbased Configuration through this address. DHCP Server: Enable if using Dynamic IP Address. DHCP Server IP Range: Range of IPs that can be assigned by the DHCP Server to each PC. PPP Configuration: Enter User ID, Password, Authentication type, and dial number of your wireless data network account. APPLY: After making changes to Network settings, always click APPLY button to saves changes.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Security Firewall Support: Client Filtering: Enable/Disable built-in firewall feature. Local Client PC group can not access specified remote application. Packet Forward: Enable specific ports to be opened for specific applications. MAC Filtering: Block specific MAC addresses. DMZ Server: Open a virtual server to public. Blocking WAN Ping: Deny Ping request from WAN IP. APPLY: Click APPLY to apply any of the Security setting changes.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Status Local Area Network: Wide Area Network: Axesstel Current operation and connection status of LAN. Current operation and connection status of WAN.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 USB Driver Installation Power on the PC. After the boot up process, you will see Found New Hardware screen and Add New Hardware Wizard screen. Insert 1xEV-DO Wireless Modem Installation CD into CD-ROM drive of PC. Select Specify the location of the driver (Advanced) and click Next. Follow the onscreen prompts to install the software driver from the CD. The software is located under “Drivers” folder named “USB_Driver”.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Click Finish after files are installed. Click Yes to re-start PC. USB Driver Installation is completed.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 TCP/IP Settings You will need to configure your PC to request IP address dynamically from the gateway. Click the Start button, select Settings, and select Control Panel. Double click the Network Connection icon. Go to Local Area Connection Properties. Select the TCP/IP protocol line that has been associated with your network card. If there is no TCP/IP line listed, you will need to install TCP/IP first. Click the Properties of the TCP/IP component.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Choose Obtain DNS Server address automatically. Click Ok to exit Properties. If asked to re-start the PC, click YES.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 Troubleshooting Q: My Wireless Modem is not working. A: Check for the appropriate power indication on the LED. If no power, check the adaptor (or External Power Supply) connection between the electrical outlet and the modem. Check for the appropriate Received Signal Strength Indication (RSSI), Power, and Message Indication through the designated LED, respectively. Q: I can’t get good signal. My connection is unstable.
1xEV-DO Wireless Broadband Modem AXW-D800/D1900 SPECIFICATIONS Frequency Range AXW-D800 AXW-D1900 Channel Bandwidth USB Connector Ethernet Connector Power Supply (Adapter) Temperature of operation Relative humidity Temperature of storage Dimension Weight (without internal battery) Axesstel TX: 824.64 ~ 848.37 MHz RX: 869.64 ~ 893.37 MHz TX: 1850 ~ 1909.95 MHz RX: 1930 ~ 1909.95 MHz CDMA 1.
Safety Information 1 . SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS .POTE NTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cauls e an explosion or fire resulting in bodily injury or even death. . INTERFERENCE TO MEDICAL DIVICES Certain electronic equipment may be shielded against RF signal from you wireless phone.
SAR INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless modem is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
SAFETY INFORMATION FOR RF EXPOSURE Body worn operation This device was tested for typical body-worn operations with the back of the phone kept 15 mm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain a 15 mm. separation distance between the user’s body and the back of the phone, including the antenna. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly.
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a digital device pursuant to Part 15 of the FCC Rules.
