User's Manual

ERMINAL RESET

World Best CDMA WLL Technology

Resets the terminal back to the factory default state.

1. Pick up the handset.

2. Press .

3. Enter 4 digit lock code. If not correct, error tone will sound and the terminal returns to standby

mode.

4. Press to reset.

Note 1: Default lock code is " ". To change, see page 16.

Note 2: This feature is automatically set after 3 seconds with a confirmation tone.

Serial Cable & USB Cable

Depending on whether you use a serial cable with 9-pin RS-232 connector or a USB cable, the

terminal must be set to appropriate Port setting.

1. Pick up the handset.

2. Press to select Serial cable.

3. Press to select USB cable.

Data Port Speed

There are three speed options. Use appropriate speed setting for you use.

1. Pick up the handset

2. Press for high speed data service. (HDR 115.2Kbps)

3. Press for low speed data service. (ASYNC 19.2 Kbps)

4. Press for PC FAX. (19.2 Kbps)

ATA SERVICE

AXW-T800 / 800R / 1900 / 1900R

Fixed Wireless Phone