User's Manual

This LED indicates the signal strength of the CDMA network serving your

Modem.

OFF No EV-DO or 1X signal

Solid Green Strongest level

Solid Orange Medium level

Solid Red Low signal

Blinking Red UIM card need input PIN number

3. Connect LED

This LED informs you that the Modem is connected to a wireless network and

passed through the user/password validation.

OFF Modem is not connected to network

Solid Green Modem is connected to network

Blinking Green Modem is dialing to network

4. 1x/EV-DO LED

This LED informs you that the Modem is tuned to a 1x or EV-DO wireless

network. Normally your Modem is programmed to search and use EV-DO

network. If unavailable, the Modem will try to search for a 1x network. Please

check with your Service Provider for default setting.

OFF 1x

Solid Green EV-DO

5. Ethernet LED

This LED indicates that there are computers connecting to your Modem via one

of the RJ-45 ports. When the LED is blinking, it indicates that there are activities

(data passed through).

OFF No RJ-45 (Ethernet) connection

Solid Green At least one of the RJ-45 ports in use

6. Wi-Fi LED (MV441)

This LED indicates that your Modem is setup to have Wi-Fi capability. When the

LED is blinking, it indicates that there are activities (data passed through).