User's Manual

Web Manager User Interface

The Web Manager User Interface is a web-based tool that you can use to set

up the Modem if you don’t want to use the default setting of Web page. You can

also use it to manage advanced functions of the Modem. From the User Interface,

you can perform the following tasks:

• View the Modem’s current settings and status

• Configure the EVDO network mode, amend the Dialer number, PPP

username, PPP password and authentication mode

• Configure the wireless settings such as SSID, security mode, enable

or disable wireless network, hide wireless network to satisfy different

requirement(not applicable to MV400i-series)

• Configure the Modem's router function to connect to your Service

Provider with the settings that they provided you

• Change the current network settings such as the Internal IP address, the

IP address pool, DHCP settings, and more

• Set the Modem’s port forwarding

• Enable or disable the Modem’s firewall, enable DMZ function to let you

set a single computer on your network outside of the router

• Set up security features such as client restrictions, MAC address filtering

• Enable the Firewall and DMZ feature for a single computer on your

network

• Change the Modem’s internal password

• Configure Dynamic DNS function

• View the Modem’s current 3G information, connected DHCP clients and

WLAN clients.

• Reset the Modem’s default settings

• Update the Modem’s firmware

Step 1

│ Access Network Setup

Follow below steps to configure your Modem’s Ethernet connection.