User's Manual

23
 PPP Login ID and password (if applicable)
 Authentication Method: A drop down menu allows users to change the
authentication method. The default value is AUTO
 Connection mode: User can choose one connection mode from “al
ways”; “manual” & “on demand”:
“always”: Modem will always connect to CDMA network when it is
power on,
“manual”: User can use “connect”; “disconnect” button to control
whether modem connect to CDMA network or not,
“on demand”: Modem will connect to CDMA network when there ar
e network requirement, and will disconnect when there are no net
work requirement in a period of time(Maximum idle time),
The default selection is “always”.
Configuring the Wireless Network Settings
Clicking on the header of the “Wireless Settings” tab will take you to the
“Wireless Settings” header page. From this page, the Modem’s Wi-Fi router