USER MANUAL FIXED WIRELESS PHONE AXW-P450 / P800 / P1900 AXW-P450B / P800B / P1900B AXW-P450R / P800R / P1900R
Fixed Wireless Phone I AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B NTRODUCTION The Fixed Wireless phone operates through a wireless connection instead of a landline phone cable, enabling the subscriber to set up the phone at any where wireless service is available.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone T ABLES OF CONTENTS Safety Precautions ........................... 3 Checking Parts ................................. 4 Setting up Your Phone ..................... 5 Starting R-UIM Card......................... 8 Getting to Know Your Phone............. 9 Display Icons..................................... 10 Function Keys................................... 11 Basic Operation Boot with R-UIM Card .............
Fixed Wireless Phone AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B S AFETY PRECAUTIONS 1. Avoid placing the phone in a dusty location, or near a source of gas or fire. 2. Don't shake, hit or drop the phone. 3. To clean the exterior surface of the phone, use only a soft, dry cloth. The chemicals in alcohol, benzine or acetone can damage the surface of the phone. 4. Do not twist or pull the cord out of the phone. 5. Do not disassemble the phone. 6.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone C HECKING THE PARTS After unpacking your phone, make sure that you have all the parts shown below. If any piece is missing or broken, please call your customer service center. 1. Main Unit 2. Handset 3. Power Adaptor 4. User Manual 5. Antenna 6. Battery 7. Stand / Wall mount bracket 8.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone S ETTING UP YOUR PHONE Installing the battery and R-UIM card (R-UIM on AXW-P450R/P800R/P1900R models only) 1. Remove screws with a screw driver and remove the battery cover on the bottom of the phone. 2. Plug the battery connector into the socket. 3. Insert R-UIM Card. (P450R/P800R/P1900R models only) 4. Put the battery cover back and fasten the screws. 5. Turn on the Power Switch "ON".
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone S ETTING UP YOUR PHONE Installing the phone This phone operates by receiving DC power from the AXESSTEL power adaptor, which connects to an electrical outlet. The phone is equipped with a rechargeable battery as a back up in case of an AC power failure.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone S ETTING UP YOUR PHONE Wall mount installation 1. Mark two mounting hole locations on the wall. 2. Drill two holes at the marked location. 3. Attach the wall mountable bracket, if needed. 4. Tighten the screws firmly. 5. Plug in power connector and route the cords in the groove on the back of the phone. 6. Insert the wall mount bracket hook into the holes on the back of the phone.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone S Service Status Check Display in the Service Area When the power cord is connected properly, all segments in the LCD window will turn on briefly and Power LED will light. The number of bars of signal strength indicator (antenna icon) indicates the strength of service signal of the area. The display will show the greeting (AXESSTEL as default), With date and time. You can change the greeting. (See page 30.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone G ETTING TO KNOW YOUR PHONE 1. Antenna ABC DEF JKL MNO MENU 2. Menu 3. Clear 4. Store 5. Message 6. Recall 7. Vol/Scroll CLEAR GHI STORE PQRS TUV WXYZ MESSAGE OPER RECALL POWER 8. Shift Keys 9. Power LED 1. Antenna: Adjusting the position of antenna improves the sound quality of the call. 2. Menu: Press to access the phone's menus. 7.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone D ISPLAY ICONS Icons display on the screen to indicate what features you are using, signal strength and battery status etc... AXESSTEL THU 10/09 2:32P Indicate the strength of the signal. More bars indicate stronger signal. Indicates the level of battery power. The more bars, the more power. When the battery is low, the icon blinks, and an alert tone sounds.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone F UNCTION KEYS MENU Press this key to display the phone's main menu. CLEAR MESSAGE STORE RECALL Clears information from the display screen. - To erase one character from the display screen, press it once. - To erase all characters on the screen, press and hold. - To go back one step in the menu mode, press it once. Press this key to retrieve messages.
Basic Operation Boot With R-UIM Card (P450R/P800R/P1900R models) Making Calls Redial Receiving Calls Adjuting Volumes Choosing the Ring Tones
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone B OOT WITH R-UIM CARD (P450R/P800R/P1900R only) 1. Enter PIN code. NOTE1: The function of pin feature can be set on/off in PIN setup menu. NOTE2: PIN code can be changed in pin setup menu. INPUT PIN **** 2. If an incorrect PIN code is entered, an error message displays. NOTE: After entering wrong PIN code 3 times, the R-UIM card becomes locked. 3.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone R EDIAL Redial the last number you dialed. 1. Pick up the handset or press RECALL 2. Press . . NOTE : You may not redial when there is no last number dialed stored in the memory. "NO LAST CALL!" message is displayed on the LCD. R ECEIVING CALLS When there is an incoming call, the phone rings and blinks "Incoming Call" message on the display. 1. Simply pick up the handset or pres to answer the call. 2.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone A DJUSTING VOLUMES You can control the sound volumes including the key tone, earpiece, speaker and the ringer Adjusting key tone volume Press repeatedly until it reaches proper volume. KEY VOLUME Adjusting external speaker volume Press repeatedly during hand free call to adjust external speaker volume.
Phone book Internal Phone Book Storing Numbers in Memory Searching for Numbers in Memory Erasing a Number in Memory Erasing All Number in Memory One-Touch Calling Two-Touch Calling
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone I NTERNAL PHONE BOOK Your phone has an internal "Phone Book" in which you can store up to 99 frequently used names and numbers. S TORING NUMBERS IN THE MEMORY 1. Press , 2 , 2 . 2. Enter the name by pressing the alphanumeric keypad STORE and pressing after completed. NOTE1: If you do not want to enter a name, just press STORE here. The number will be saved as "No Name".
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B NOTE: If you select the location in which a number has already been stored, "OVERWRITE?" will CLEAR STORE display. Press to overwrite or press to go back to automatic location. STORE 6. "CONFIDENTIAL ?" displays. Press if no secret feature is necessary. To store the number in secret, select 'YES' by pressing (or , ) and Fixed Wireless Phone OVERWRITE ? 01 : JOHN MILLER CONFIDENTIAL ? NO STORE press .
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone Searching by Phone Number 1. Press MENU , 2 (Phone book), 1 (Search), 2 (Number). PHONE NUMBER? 2. Enter all or part of the number you remember and STORE press . 3. The phone displays the memory location and names which contain your entry. NOTE: "NO NUMBER MATCHES" appears when there is no number matching your entry. 4.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone E RASING A NUMBER IN MEMORY To Erase a Specific Number MENU 1. Press , 2 (Phonebook) and 3 (Erase). NAME? 2. Press one of search options, 1 (Name), 2 (Number) or 3 (Memory). 01 : JOHN 03 : JAMES 3. Enter name, address, or phone number according to search option. 4. Select an item to erase by pressing (or , STORE and pressing .
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone 4. Select 'YES' by pressing (or , ). REALLY CLEAR? YES STORE 5. Press to confirm. ERASE ALL MEM PLEASE WAIT... O NE-TOUCH CALLING Memory locations 01 ~ 09 are special one-touch dialing locations. You can dial the numbers stored in 01~09 by pressing just one key. 1. Pick up the handset or press . 2.
Useful Features Call History Displaying Your Phone Number Mute Silent Keypad Sending Your Phone Number Selecting Time Mode Setting the Alarm Checking and Clearing Call Times Setting Warning Alerts
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone C ALL HISTORY Your phone stores the last 10 outgoing calls and the last 10 incoming calls (only when Caller ID function is activated). You can display and redial these numbers. Redialing Outgoing Calls MENU 1. Press , 1 (Call History), 1 (Outgoing). NOTE: If there's no outgoing call history, "OUTGOING CALL MEMORY EMPTY!" displays. 2. Press 3. Press RECALL or , to select number to redial.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone Erasing All Numbers in Call History MENU 1. Press , 6 (Security). 2. Enter lock code. NOTE: Lock code is set as 0000 from the factory. To change lock code, see page 33. ENTER LOCK CODE 3. Press 8 (Erase Logs). STORE 4. Press to confirm. EARSE CALL LOGS YES? D ISPLAYING YOUR PHONE NUMBER Displaying Your Phone Number MENU 1. Press 6 (Security). 2. Enter lock code.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone S ILENT KEYPAD You can check your own phone number or save a number during a conversation without transmitting the dial tones to the other party. This function is available only during a telephone conversation. 1. Press MENU , 2 (Silent Key) during conversation. 'SILENT KEY' blinks to indicate the function is working. MENU 2. Press , 2 again to disable the feature.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone S ETTING THE ALARM You can set the alarm sound daily or one time only. 1. Press MENU , 3 (Time), 1 (Alarm). 2. Select "SET" by pressing press STORE (or , ALARM ) and SET . 3. Enter alarm time and press STORE . 4. Select alarm mode by pressing (or , 07 : 00am 22 : 32pm ) STORE and press . Daily: Alarm sounds daily. One time: Alarm sounds once. ALARM MODE DAILY 5.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone C HECKING AND CLEARING CALL TIMES Checking the Last Call Time 1. Press 2. Press MENU MENU , 3 (Time), 2 (Last Call). to clear the display. LAST CALL TIME 3:25 Checking Accumulated Incoming Call Time 1. Press MENU , 3 (Time), 3 (Total Time), 1 (Incoming). 2. Press CLEAR INCOMING CALL 3:25 to clear the display. Checking Accumulated Outgoing Call Air Time MENU 1.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone S ETTING WARNING ALERTS You can set your phone to sound warning beeps that indicate: - each minute you are on a phone call - when you are out of the service area Setting/Releasing 1 Minute Alert MENU 1. Press , 4 (Sound), 4 (1 Min Alert). 2. Select ON or OFF by pressing (or , ) STORE 3. Press . NOTE: When 1 minute alert is set, the phone gives alert sound each minute while you are on a phone call.
Advanced Features Changing Greeting Message System Reset Restricting Use of the Phone Locking / Unlocking the Phone Pin Setup (P450R/P800R/P1900R models only) Changing the Lock Code Changing R-UIM PIN Code (P450R/800R/1900R only) Tone Length and Back Light
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone C HANGING GREETING MESSAGE This feature lets you change the greeting message that the phone displays during standby mode. 1. Press MENU , 6 (Security). 2. Enter your lock code. NOTE: Lock code is set as 0000 from the factory. 1. GREETING 2. CHANGE CODE To change lock code, see page 33. 3. Press 1 (Greeting). Current greeting displays. STORE 4. Press to change greeting. 5.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone R ESTRICTING USE OF THE PHONE You can restrict the use of the phone by unauthorized persons. Restricting Outgoing Calls MENU 1. Press , 6 (Security). 2. Enter lock code. 1. OUTGOING 2. INTERNATIONAL NOTE: Lock code is set as 0000 from the factory. To change lock code, see page 33. 3. Press 3 (Restrict), 1 (Outgoing). 4. Select 'ON' by pressing (or , ). STORE 5. Press to save change.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone L OCKING / UNLOCKING THE PHONE You can lock your phone so that calls cannot be made by unauthorized persons. You can still receive incoming calls. Turning the phone off does not unlock the phone; the phone stays in locked mode until you change it. MENU 1. Press , 6 (Security). 2. Enter lock code. 3. Press 6 (Auto Lock). 4. Select 'ON' or 'OFF' by pressing (or , FRI ). - LOCKED 10/11 2:44P STORE 5.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone STORE 6. Enter same code with your new PIN code, press confirm re-enter new PIN code for verification. to NOTE: "CODE NOT MATCHED TRY AGAIN!"displays if the second entry does not match the fiest entry. COMFIRM NEW PIN _ _ _ _ _* _* _* _* CHANGE PIN SUCCESSFULLY ! You can disable / enable PIN code feature. 1. In 'PIN SETUP' MENU , press 2 (Enable PIN). ENABLE PIN NO 2.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone T ONE LENGTH Some ARS systems may be able to recognize only long tones. You may have to change the tone length to LONG. 1. Press MENU , 5 (Configuration), 1 (Tone Length). 2. Select 'NORMAL' or 'LONG' by pressing (or , ). 3. Press STORE to save the change.
Optional Features Call Forwarding Call Waiting Three-way Calling Message Service Data call service
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone C all Forwarding Call Forwarding is a feature that lets you forward your incoming calls to another phone number, even if your phone is turned off or is in no service area. Contact your service provider to activate Call Forwarding. C all Waiting Call Waiting alerts you to a second incoming call while you are on the conversation . When there's another incoming call, you will hear warning beep.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone M ESSAGE SERVICE Message Service is network dependent feature and is available only when your service provider supports it. Check your service provider is providing message service before using this function. Sending New Text Messages 1: NEW 2: SAVED MSG MESSAGE 1. Press , 3 (Send MSG), 1 (Send new). STORE 2. Enter destination number and press . 3.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone Received Text Message 1. When text message arrives, 'MESSAGE! 10/12 4:04 PM' displays shortly and appears in the icon line. 2. Press MESSAGE , 2 (Text Mail). 3. Press (or to see and press , STORE MESSAGE! 10/12 4:04 P ) to select message you want . 4. The message, arrival time and call back number (if 1: VOICE MAIL [00 2: TEXT MAIL <02> available) display.
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone Erasing All Messaged 1. Press MESSAGE 4 (MSG Erase) . 2. Select 'YES' with 3. Press STORE . (or , ). ERASE ALL? YES Setting/Releasing Message Lock 1. Press MESSAGE , 5 (MSG Option), 1 (MSG Lock). 2. Select 'ON or OFF' with or , . STORE 3. Press . If message lock is set, the phone will ask for the lock code whenever you try to retrieve message. MESSAGE LOCK ON Setting/Releasing Message Alert 1.
Miscellaneous Menu Table Conversation and Message Menu Specification
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone MENU OPTION TABLE Explanation 1: OUTGOMING Stores ten phone numbers called most recently 2: INCOMING Stores ten phone numbers of calls received most recently 1:CALL HISTORY 3: MISSED 1: SEARCH 2:PHONE BOOK SEARCH OPTION BY NAME / NUMBER / OR ROCATION Used when storing a phone number and name in the phone book 1: STORE 1: ERASE SEARCH OPTION NAME / NUMBER / MEMORY Used when erasing a phone number in
AXW-P450 / P450R / P450B AXW-P800 / P800R / P800B AXW-P1900 / P1900R / P1900B Fixed Wireless Phone 6: AUTO LOCK ON / OFF Lock the phone 7: MY PHONE # 7:DATA SERVICE (Optional) Check your phone number 8: ERASE LOGS YES Erases numbers in outgoing or incoming call history 9: PIN SETUP (R-UIM models only) 1: CHANGE PIN Changed PIN code 2: ENABLE PIN Lock the phone by PIN code 1: DATA PORT SERIAL / USB Selects data port configuration 2: DS SPEED 115.2Kbps / 19.
