Manual


21
FACTORY RESET
Reset the user configuration to factory default settings.
1. Pick up the handset.
2. Press
□
*
□
*
□
3
□
5.
3. Enter the 4 digit lock code. If not correct, an error tone will sound and the terminal will return to
standby mode.
4. Press
□
# to reset.
NOTE 1: The default lock code is
□
0
□
0
□
0
□
0 . To change, refer to “Changing Lock Code” section.
NOTE 2: Factory reset includes auto send time, lock code, call restrictions, caller ID type, voice
.privacy alert, connection alert and 1 minute alert.
TTY/TDD
MODE SETTING
To use the TTY/TDD feature, refer to following instruction. The default setting is OFF.
1. Connect the TTY/TDD phone to the terminal through the RJ-11 jack.
2. Pick up the handset.
3. Press
□
*
□
*
□
4
□
1
□
0
□
# for TTY Full Mode.
4. Press
□
*
□
*
□
4
□
1
□
1
□
# for TTY Talk Mode.
5. Press
□
*
□
*
□
4
□
1
□
2
□
# for TTY Hear Mode.
6. Press
□
*
□
*
□
4
□
1
□
3
□
# for Off.
NOTE 1: For the detailed instructions, contact your service provider.
NOTE 2: Some TTY device may not generate the DTMF tone for * and #, which is necessary to
change the TTY/TDD mode. In such case, please use regular analog phone to enter the
mode change key sequence.