User Guide VerizonONE Phone Model Number: W2-3DWCB
GENERAL INFORMATION Thank you for purchasing the only phone you will ever need! The VerizonONE phone is the only phone of its kind that provides the quality of a digital cordless phone with the convenience and mobility of the latest in cellular phone technology. station, a “Wireless Incoming Call” Message will be shown on the display at the time of ringing. If the base is turned off or the cordless signal is weak, the phone may turn to Wireless mode.
Description of the keys Antenna Speaker KEY FUNCTIONS Icons Soft Key 2 Digit Keys are used to enter numbers, letters, and symbols. Display Soft Key 3 Soft Key 1 Talk / Send / Recall Key Digit Keys Vibration / Up Key Soft Keys are used with the various menus available through the handset display. TALK/SEND/RECALL Press before or after entering the phone number to make a call (depending on mode). Press and hold for one second to redial the last phone number in the call history.
ICONS Indicates signal strength and presence of Wireless network. CHARGING THE BATTERY The Cordless Base also serves as the charging station for the phone. Place the handset in the base station to charge the battery. The Charge LED on the base and animated battery icon In Use. Call is in progress. in the handset display indicates the status of charging. The Charge LED will show Red when the handset is not fully charged and Green when it is fully charged. Out of Service Area.
the other party to hang up. phone with the appropriate information. 3. A message similar to “Update Successful” should appear on the display VOICEMAIL indicating programming is complete. Setting up Voicemail POWERING THE PHONE ON / OFF Press and hold END/PWR key to power the phone On / Off. When turned on, wait a few seconds for the phone to initialize. Remember: If you turn the phone off, you won’t receive calls even when you are at home! Your other home phones will ring as they normally do.
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide ADJUSTING EARPIECE VOLUME reasonable protection against harmful interference in a residential installation. This During a call, press the Volume Up / Down keys on the left side to adjust the earpiece equipment generates, uses, and can radiate radio frequency energy and, if not installed and volume. used in accordance with the instructions, may cause harmful interference to radio communications.
Tests for SAR are conducted using standard operating positions specified by the FCC with Communications Commission of the U.S. Government. These limits are part of the phone transmitting at its highest certified power level in all tested frequency bands. comprehensive guidelines and establish permitted levels of RF energy for the general Although the SAR is determined at the highest certified power level, the actual SAR level of population.
