AXI03000 INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUEL D’UTILISATION MANUALE DI ISTRUZIONI
EN NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com or towerhobbies.com and click on the support or resources tab for this product.
EN TABLE OF CONTENTS vehicle maintenance .............................................................................................. 9 AE-5L Forward/reverse ESC with drag brake .................................................. 10 Troubleshooting..................................................................................................... 10 Notes ....................................................................................................................... 11 Limited Warranty............
EN BOX CONTENTS • STX3™ 3Ch 2.4GHz FHSS Radio Transmitter (SPMSTX300) • (4) AA Alkaline batteries • Capra™ 1.
EN GETTING STARTED CHECKLIST Read the manual Power on the transmitter Familiarize yourself with the vehicle and its components Install the vehicle battery in the vehicle Check all screws, especially the driveshaft setscrews, for tightness from the factory Check for proper function of the throttle and steering Range check the radio system Charge the vehicle battery Drive the vehicle, challenge yourself and have FUN! Install 4 AA batteries in the transmitter Perform any necessary vehicle maintenance
EN CHARGE THE VEHICLE BATTERY Follow the manufacturer’s directions for your charger to properly charge the vehicle battery. CAUTION: Only use chargers designed to charge the chosen battery type. Using an incompatible charger or incorrect charge settings could result in fire causing person injury or property damage. INSTALL THE TRANSMITTER BATTERIES This transmitter requires 4 AA batteries. 1. Remove the battery cover from the transmitter. 2. Install the batteries as shown. 3. Install the battery cover.
EN INSTALL THE VEHICLE BATTERY NOTICE: Power to the vehicle is controlled by connecting and disconnecting the battery from the ESC. Always power on the transmitter first before connecting the vehicle battery. Always disconnect the battery from the ESC when not in use. 1. Power on the transmitter. 2. Remove the body clips and open the hood. 3. Connect the battery to the ESC. Close the hood and replace the body clips. NOTICE: Always disconnect the battery from the ESC before powering off the transmitter.
EN BINDING Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identifier) code of a single specific transmitter. The STX3™ transmitter and SPMSRX300 receiver are bound at the factory. If you need to rebind, follow the instructions below. 1. Insert the bind plug in the BIND port on the receiver. 2. Connect a fully charged battery pack to the ESC. 3. Power on the ESC. The red receiver LED flashes, indicating the receiver is in bind mode. 4.
EN VEHICLE MAINTENANCE Just like a full size car or truck your RC vehicle must undergo periodic maintenance in order to ensure peak performance. Preventative maintenance will also help avoid needless breakages which could result in costly repairs. Below are some suggestions to properly maintain your vehicle.
EN AE-5L FORWARD/REVERSE ESC WITH DRAG BRAKE Battery ESC Motor Red Black To Receiver Throttle Channel SETUP Throttle calibration should not be needed out of the box. However, in order to make the throttle range of different transmitters, the calibration of the ESC is necessary: • Mount the ESC in an area that is well ventilated and isolated from vibration and shock. • Connect the ESC motor wires to the motor red-to-red and black-to-black. • Plug the receiver into the throttle channel of the receiver.
EN NOTES 11
EN LIMITED WARRANTY What this Warranty Covers Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the “Product”) will be free from defects in materials and workmanship for a period of 2 years from the date of purchase.
EN FCC INFORMATION FCC ID: BRWSTX3 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
EXPLODED VIEWS // EXPLOSIONSZEICHNUNGEN // VUES ÉCLATÉES // VISTE ESPLOSE FRONT AXLE VORDERACHSE ESSIEU AVANT ASSALE ANTERIORE AXA0286 AXI234006 AXI234004 AXI234008 AXA31028 AXI234003 AXA120 AXA232017 AXI234004 AXI234006 AXI234004 AXI234004 AXI234009 AX31407 AX31066 AXI232003 AX31406 AXI232006 AX31403 AXI232009 AXI234006 AXI234004 AXI234006 AXI234004 AXI234006 AXA116 AXI234005 AXI234008 AXI234004 AXI234006 AX31403 AXA120 AXA1230 AXI232009 AXA1221 AXI232006 AXI235109 AXI234006 AXI234
TRANSMISSION GETRIEBE TRANSMISSION TRASMISSIONE AXA1218 AX31312 AXA0109 AXA144 AXA148 AXI232014 AXA291 AXA1218 AX30569 AXI236175 AXI232012 AXI232011 AXA1218 AXI232011 AXA1218 AXI232013 AXA1218 AXI232013 AXI232014 AXA1234 AXI232012 AX31250 AXA144 AXI232015 AXI232013 AXI237003 AXI232011 AXI232011 AXI232011 AXA31642 AXA146 AXI232014 AXA1225 AXI232012 AXI232014 AXA144 CHASSIS KAROSSERIE CHÂSSIS TELAIO AXI235169 AXI232011 AXI232016 AXA116 AX31066 SPMSSX107 AX31066 AXI232016 AXA1
CHASSIS KAROSSERIE CHÂSSIS TELAIO AXI235097 AXI230012 (Clear) AXI235097 AXA118 AXA116 AXI230012 (Clear) AXA120 AXA116 AXI235269 AXA114 AXI231006 AXA118 AXI231006 AXI231006 AXA116 AXI235097 AXA116 AXI231006 AXI231006 AXI235097 AXA115 AXI231006 AXA118 AXA118 AXI235098 DYNS2213 AXA114 SPMSRX300 AXI231006 AXI231006 AXA118 AXA118 AXA116 AXI235102 AXA118 AXA118 AXI230010 AXA231006 AXA116 AXA120 AXI235098 AXI231006 AXA116 AXI231006 AXA116 AXA118 AXI230012 (Clear) AXI235097 52
WHEELS AND TIRES REIFEN UND RÄDER ROUES ET PNEUS RUOTE E PNEUMATICI AXI232018 AXI231006 AXI43004 AXA1059 AXI236172 AXA114 AXI43004 AX31565 AX31250 SHOCK ABSORBERS STOSSDÄMPFER AMORTISSEURS AMMORTIZZATORI AXI235094 AXI233002 AXI233003 AXI233000 AXI233002 AXA1392 AXI233001 AXI233003 AXI233002 AXI233006 AXI233002 AXI235099 53
PARTS LISTS // TEILELISTEN // LISTE DES PIÈCES // ELENCO COMPONENTI Part # Description Beschreibung Description Descrizione AXI230010 Head Light Lens Scheinwerferlinse Lentilles de phares Lenti per faro AXI230011 Interior Set Interieurset Set interni AXI230012 Body Panel Set (Clear) Karosserieteilesatz, farblos Set pannelli carrozzeria, trasparente AXI231005 Skid Plate Motorschutz Ensemble d’intérieur Ensemble de panneaux de carrosserie, transparent Plaque de protection AXI231006 UTB
Part # AXIC0013 Description AXA013 Cap Hd M2x6mm Blk Oxide Beschreibung Description Inbusschraube, M2x6mm, Schwarzoxid Vis d’assemblage creuse M2x6mm brunie Douille à six pans à tête bombée M3x10mm Descrizione Vite a testa cilindrica M2x6mm ossido nero Vite a testa tonda con esagono incassato M3x10mm Vite a testa piana esagonale M3x8mm nero (10) AXIC0115 AXA115 Hex Skt Butn Head M3x10mm Sechskant-Rundkopfschraube, M3x10mm AXIC0118 AXA144 Hex Flt Hd M3x8mm Blk10mm Sechskant-Flachkopfschraube, M3x8m
OFFICIALLY LICENSED BY: AXI03000 facebook.com/axialinc | instagram.com/axialracing | twitter.com/axialrc youtube.com/axialvideos | flickr.com/axialrc ©2019 Horizon Hobby, LLC. Axial, the Axial logo, Capra, DSM, STX3, IC3 and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. Nitto® and Trail Grappler® are registered trademarks of Nitto Tire U.S.A., Inc.