Scan the QR code and select the Manuals and Support quick links from the product page for the most up-to-date manual information. Scannen Sie den QR-Code und wählen Sie auf der Produktseite die Quicklinks Handbücher und Unterstützung, um die aktuellsten Informationen zu Handbücher. Scannez le code QR et sélectionnez les liens rapides Manuals and Support sur la page du produit pour obtenir les informations les plus récentes sur le manuel.
EN NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com or towerhobbies.com and click on the support or resources tab for this product.
EN TABLE OF CONTENTS Water-Resistant Vehicle With Waterproof Electronics.............................. 3 Box Contents..................................................................................................... 4 Required Equipment......................................................................................... 4 Recommended Tools........................................................................................ 4 Getting Started Checklist...............................................
EN BOX CONTENTS • SCX6™ 1/6 Jeep JLU Wrangler RTR - SR515 DSMR 5 CH Receiver (SPMSR515) - 1200Kv 1/6 Brushless Sensored Crawler Motor (SPMXSM3100) - 120A Crawl Smart Brushless Sensored ESC (SPMXSE1080) - Water Proof S905 Large Scale Servo 15T (SPMS905) - Water Proof Metal Gear Surface Servo (SPMS614) • Spektrum™ DX3™ 2.
EN GETTING STARTED CHECKLIST Read the manual Power on the transmitter Familiarize yourself with the vehicle and its components Install the vehicle battery in the vehicle Check all screws, especially the driveshaft setscrews, for tightness from the factory Check for proper function of the throttle and steering Range check the radio system Charge the vehicle battery Drive the vehicle, challenge yourself and have FUN! Install 4 AA batteries in the transmitter Perform any necessary vehicle maintenance
EN CHARGE THE VEHICLE BATTERY Follow the manufacturer’s directions for your charger to properly charge the vehicle battery. CAUTION: Only use chargers designed to charge the chosen battery type. Using an incorrect charger or incorrect charger settings could cause the battery to catch fire or explode. INSTALL THE TRANSMITTER BATTERIES This transmitter requires 4 AA batteries. 1. Remove the battery cover from the transmitter. 2. Install the batteries as shown. 3. Install the battery cover.
EN ADJUSTING THE VEHICLE BATTERY TRAY The battery trays may be adjusted to fit a wide range of battery sizes. To adjust the battery tray: 1. Loosen the four flathead screws shown in the illustration. 2. Slide the ends of the battery tray in or out to fit the desired battery. 3. Tighten the four flathead screws. Do not over-tighten the screws. INSTALL THE VEHICLE BATTERY The following steps show the installation of a single standard size battery in the left battery tray of the vehicle.
EN BINDING Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identifier) code of a single specific transmitter. The transmitter and receiver are bound at the factory. If you need to rebind, follow the instructions below. 1. Connect a fully charged battery pack to the ESC/receiver. 2. Disconnect the two-speed transmission servo lead from the receiver. 3. Push and hold the receiver bind button. 4. Power on the vehicle. 5.
EN VEHICLE MAINTENANCE Just like a full size car or truck your RC vehicle must undergo periodic maintenance in order to ensure peak performance. Preventative maintenance will also help avoid needless breakages which could result in costly repairs. Below are some suggestions to properly maintain your vehicle.
EN ESC OPERATION SPECIFICATIONS Dimensions (L × W × H) 47mm × 36mm × 24mm Weight 4 oz (113.4g) Max Current 120A Voltage Range Voltage Range 2-4S Lipo Servo Output Voltage 6 or 7.
EN 1. Running Mode: Select your running mode, Forward and Reverse without brake (F/R) is the preferred rock crawler mode. Select Forward Reverse and Brake (F/R/B) if you want to use reverse throttle input to control brakes. 2. Cutoff Voltage: Low Voltage Cutoff (LVC) for Lipo Protection. This item is mainly for preventing LiPo packs from being overdischarged. If the LVC is enabled, the ESC will reduce the output to 50% and cut power 10 seconds later when the voltage goes below the cutoff threshold.
EN PROBLEM POSSIBLE CAUSE SOLUTION Ensure the transmitter antenna is not blocked and the Improper antenna placement receiver antenna is located properly Weak or no batteries in the transmitter Install a freshly charged vehicle battery and new or vehicle transmitter batteries Loss of vehicle control Neutral or trim position is incorrect Adjust the steering trim Receiver and/or battery not connected Check all receiver and battery connections properly Servo travel is reversed at the transmitter Set the trans
EN via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/content/service-center_renderservice-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service.
EN COMPLIANCE INFORMATION FOR THE EUROPEAN UNION EU COMPLIANCE STATEMENT: Axial SCX6 Jeep JLU Wrangler (AXI05000) Hereby, Horizon Hobby, LLC declares that the device is in compliance with the following: EU Radio Equipment Directive 2014/53/ EU; RoHS 2 Directive 2011/65/EU; RoHS 3 Directive - Amending 2011/65/ EU Annex II 2015/863. The full text of the EU declaration of conformity is available at the following internet address: https://www.horizonhobby.com/content/ support-render-compliance.
AXI05000 EXPLODED VIEWS // EXPLOSIONSZEICHNUNGEN // VUES ÉCLATÉES // VISTE ESPLOSE FRONT AXLE VORDERACHSE ESSIEU AVANT ASSALE ANTERIORE AXI252011 TLR255010 AXI254006 AXIC0225 AXI256000 AXI252004 AXI254006 AXI254002 AXI254005 AXI254004 AXI254006 LOS255016 AXI254005 AXI254005 AXI237033 AXI252009 TLR255010 AXI252005 AXI254005 AXI256000 AXI254006 TLR255010 TLR255010 AXI252003 AXI254005 LOS255014 AXI252010 AXI237020 AXI252009 AXI256001 AXIC0225 AXI235129 LOSB5972 AXI254005 AXI254006 AXI
AXI05000 EXPLODED VIEWS // EXPLOSIONSZEICHNUNGEN // VUES ÉCLATÉES // VISTE ESPLOSE REAR AXLE HINTERACHSE ESSIEU ARRIÈRE ASSALE POSTERIORE TLR255008 AXIC0225 AXI252011 LOSB5972 AXI252008 AXI252006 AXI252002 AXIC0225 TLR255010 AXI254005 AXI252007 AXIC0146 AXI252007 AXIC0045 LOSB5972 AXI256001 AXI252009 AXI252010 AXI252001 AXI254005 AXI237020 AXI254005 TLR255010 AXI254006 AXI252009 AXI252006 AXI254005 LOS255016 AXI252011 AXI235129 AXIC0225 TLR255008 AXI254003 TLR256011 TLR255010 AXI254005
AXI05000 EXPLODED VIEWS // EXPLOSIONSZEICHNUNGEN // VUES ÉCLATÉES // VISTE ESPLOSE CHASSIS KAROSSERIE CHÂSSIS TELAIO AXIC0118 AXIC0146 TLR255010 TLR255014 AXI251001 AXI251009 AXI251001 AXIC1009 AXIC0085 AXI250002 LOS255014 AXI254007 SPMS905 LOS255017 AXI251001 TLR255010 AXI256001 AXI251009 LOS255014 AXI251010 AXI254007 AXIC0146 AXI251000 AXI251001 AXI251007 LOS255017 AXIC0116 AXI251008 AXI254007 TLR255010 LOS255017 AXI251001 TRANSMISSION GETRIEBE TRANSMISSION TRASMISSIONE LOS255017
AXI05000 EXPLODED VIEWS // EXPLOSIONSZEICHNUNGEN // VUES ÉCLATÉES // VISTE ESPLOSE CHASSIS KAROSSERIE CHÂSSIS TELAIO LOS255014 LOS255014 LOS255017 LOS255014 AXI251002 AXI251001 LOS255014 AXI251002 AXIC0118 AXI250003 AXIC0118 AXI251007 AXIC0118 AXI251007 AXI251003 LOS255014 AXIC0118 AXI251007 AXI256002 AXI251007 AXI251003 LOS255014 AXI250003 LOS255014 AXIC0118 AXIC0118 AXI256002 57
AXI05000 EXPLODED VIEWS // EXPLOSIONSZEICHNUNGEN // VUES ÉCLATÉES // VISTE ESPLOSE BODY ASSEMBLY KAROSSERIEMONTAGE ENSEMBLE DE CARROSSERIE GRUPPO CARROZZERIA AXI250009 TLR5913 AXIC0012 AXI250001 TLR255014 AXIC0118 LOS255020 AXI250010 AXI250004 AXI250000 AXI250004 LOS255020 AXI15001 AXI250009 AXI250008 AXI250004 AXIC0118 TLR255013 TLR255013 LOS255020 AXI15001 TLR5913 AXIC0012 AXI250010 AXIC1185 AXI250004 TLR255013 AXIC0118 AXI250001 AXI250001 TLR255014 AXI250004 TLR245012 TLR255013 TLR255013
PARTS LISTS // TEILELISTEN // LISTE DES PIÈCES // ELENCO COMPONENTI ARA723412 Cap Head Screw M4x12mm (4) Inbusschraube M4x12mm (4) ARAC9701 AR702002 Cap Hd Scrw 2.5x12(10) AR702002 Inbusschraube 2,5x12(10) AXI15000 AXI235099 AXI235102 AXI235129 AXI235192 White LED Light String M2.5 x 10mm, Button Head (10) M2.
AXI252016 Idler Gear&Output Shaft S Zwischenrad u.
LOS255017 FlatHdScrews,Stl,BO,M4x16mm(10) LOS255019 LOS255020 FlatHdScrews,Stl,BO,M4x14mm(10) FlatHdScrews,Stl,BO,M4x18mm(10) LOSB5972 Outer Axle Bearngs 12x24x6mm(2) TLR245012 TLR255008 TLR255009 TLR255010 Button Head Screws, M2.
facebook.com/axialinc | instagram.com/axialracing | twitter.com/axialrc youtube.com/axialvideos | flickr.com/axialrc ©2021 Horizon Hobby, LLC. Axial, the Axial logo, DSM, DX3, DSMR, IC5, EC5, SCX6, and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. The Jeep name and associated vehicle likenesses are trademarks or registered trademarks of FCA US LLC and are used under license.