Technical data

Operation Instructions | EoC 2-01 | Ethernet over Coax | WiFi
14 2015-01-1916 | © AXING AG Schweiz | Konstrukions -, Typenänderung, Irrtümer und Druckfehler vorbehalten
5.3. Wireless Settings
5.3.1. Wireless Basic Settings
On this page the settings for the local Wi-Fi Access Point are set.
Attention: Only 2.4 GHz-Mode is supported!
In the "Mode" menu you can select whether you want the device to act as "AP" (Access Point), "Client" (of
another Wi-Fi-Network) or "AP + WDS".
5.3.2. Wireless Security Setup
On this page the settings for Wireless Security are set.
Please note that only WPA & WPA2 are secure options (WEP is known to be vulnerable).
The use of WPA2-AES (no mixed mode) is recommended.
The key has to consist of at least 8 characters.
You are free to choose of capital and small letters as well as digits.