User manual

A630/A631/A632 Printer Series User Manual Page 27 / 63 Reference: FDE 3106894 Issue F
3.7 Configuration menu description
Program mode: The program switch may be accessed by keeping pressed the paper feed button during
the self test.
3.7.1 How to enter
To enter the program mode:
Power down the printer
Press the power button and the paper feed button together
Release the power button, keep the paper feed button pressed until the text “A630 configuration menu” is
printed.
3.7.2 How to move in the program
To move in the list of the parameters do a short click on paper feed button.
A long click allows selecting the parameter you want to change.
Then a short click allows you to move in the possible choices for that parameter. Do a long click to
validate the choice.
3.7.3 How to adjust parameters
For default parameters, see "Self test" chapter.
3.7.4 How to quit and save the program
When all the necessary changes to the parameters have been made, select the parameter “END” and
validate with a long click.
A new long click is asked, and then the printer has to be reset.