Instruction manual

A758 Owner’s Guide Chapter 1: About the Printer
September 1999 5
Options
Connectivity Options
♦
A standard plug-in printed circuit board allows the printer to use an RS-232C
communication interface. Optional plug-in boards are available for other
communications interfaces.
♦
Communication cables are available for the various communication
interfaces.
♦
Power supplies are available in 55 Watt or 75 Watt versions.
♦
3-pin to 6-pin power connection adapter to allow previous version power
supplies (or terminal cables) to be connected to the A758.
Thermal Receipt Printer Options
♦
The optional receipt cutter.
Impact Slip Printer Options
♦
The slip table is available in either standard or 2 extended sizes. An extended
slip table is standard with the MICR check reader and flip options.
♦
The Magnetic Ink Character Recognition (MICR) check reader is built into the
slip station. It reads checks that use standard E13B or CMC7 MICR fonts.
♦
Check Flip Option: after reading the MICR line on the front of the check and
printing on the back, the printer is able to flip the check over and print on the
face of the check.
Electronics and Firmware Options
♦
1 MB or 2 MB Expanded flash memory are available as factory
configurations.