Product Overview

MODEL MF300 ‘PRESSURE PAL’ MINI SYSTEM FEEDER
The ‘PRESSURE PAL’ is ideal for feeding and pressurizing
closed hydronic systems that do not require cold static fill
pressures higher than 170 kPa (25 psig). It is compatible
with both water and glycol/water solutions. Perfect for
small boiler/chiller systems, snow/ice melt circuits, outside
air heating/cooling glycol coils, solar heating systems.
FEATURES and BENEFITS
 65 litre (17 US gallon) tank for storage and mixing
 Power supply plugs into any standard 115 VAC outlet
 Diaphragm pump can run dry without damage
 No direct connection to potable water supply eliminates need for backflow prevention
 Make-up fluid stored in the feeder tank can be pre-treated
 Diverter valve allows easy purging of air on initial start-up, and manual agitation of solution
 Prevents major floods - in the event of system rupture, only the contents of the tank will be pumped
into the system
 Provides leak detection - dropping fluid level provides immediate notice that the system has developed
a leak
 Fluid drained for service can easily be put back into the system
 Fluid level switch shuts the pump off if the storage tank level gets too low
 Auxiliary dry contact included for remote low pressure alarm (alarm optional or by others)
Represented By: