User's Manual

Stealth Repeater

- QSG

When you have typed in the information on the location of

the Stealth Repeater, check over it that the information is

correct. After checking, tap “Next”.

When you have tapped next the screen will change asking

you to swipe the Stealth Repeater with a magnet to

activate it. Another way to activate the Stealth Repeater is

to push the “Connect” button on the device. This button

will activate the Stealth Repeater that will allow it to be

recognized by the SMiRF program.

When the it has Stealth Repeater has been activated the

SMiRF will display a screen showing all the information

that it got from the device. Make sure that all the

information is correct before continuing forward.

When you tap “Next” the SMiRF will install all the

information into the Stealth Repeater and acquire GPS

information. If GPS information is not available a warning

message will be displayed. Upon successful instalation of

the Stealth Repeater an installation summary window is

shown for review. When done evaluating the information,

tap “OK”.

With this the Stealth Repeater has been fully installed and

ready for use.

System Manager Software

The MeshPlus

System Manager software makes configuration and management of your

Repeater easy and intuitive. System Manager graphical software allows you to use your

computer, notebook, or tablet to communicate with a Repeater via direct USB

connection, via TCP/IP network connection, or remotely via wireless link. In the field,

System Manager is typically installed on a rugged IP-65 MeshPlus tablet computer. The

tablet computer is equipped with integral GPS and USB Mesh Stamp

allowing a field

technician to install, diagnose, and configure Repeaters and other mesh infrastructure

devices from the safety and convenience of their truck.

The latest System Manager software can be downloaded from the MeshPlus website; it is

also supplied on the MeshPlus Software CD or DVD.

Requirements

• System Manager requires Microsoft Windows XP, Vista, or 7.

• Pentium IV processor or better

• 1GB RAM or more

• 20GB hard disk drive or larger

To install System Manager, download SystemManagerInstaller.exe from:

http://www.meshplus.com/Downloads/SystemManager/current/