Owner manual

GOT3126T-834 User’s Manual
Hardware and Installation 15
PCIe device & mSATA device selection (JP6)
The default setting of JP6 is for PCIe mini-card. If you want to install mSATA card on your
system, please remember to set this jumper to “2-3 close”.
Restore BIOS Optimal Defaults (JP8)
Put jumper clip to pin 2-3 for a few seconds then move it back to pin 1-2. Doing this procedure
can restore BIOS optimal defaults.
Function
Setting
PCIe device(default)
1-2 close
mSATA device
2-3 close
Function
Setting
Normal operation (Default)
1-2 close
Restore BIOS optimal defaults
2-3 close