Owner manual

GOT3126T-834 User’s Manual
Drivers Installation 53
4.2 Touch Screen
The GOT3126T-834 uses the 5-wire analog resistive (flat front bezel type). There are the
specification and driver installation which are listed below.
4.2.1 Specification
4.2.2 Driver Installation- Windows 7/8.x
The GOT3126T-834 provides a touch screen driver that users can install it under the operating
system Windows 7/8.x. To facilitate installation of the touch screen driver, you should read the
instructions in this chapter carefully before you attempt installation.
1. Insert Driver CD and follow the path to select the “\Drivers\Step 7 - Touch”.
2. Follow the installing procedure and press OK.
3. Click Start menu and select “PenMount Utilities”; and then, a “PenMount Control Panel”
pops out.
Touch Screen
5-wire Analog Resistive type
Touch Screen Controller
PenMount 6000 USB Touch Screen Controller IC
Communications
USB interface
Resolution
1024 x 1024
Power Input
5V
Power Consumption
Active: 24.6mA / Idle Mode: 13.4mA