User`s manual

MANO873 Series All-In-One Mini ITX Board

20 Board and Pin Assignments

Power On/Off Button

Pin 9 and 10 connect the power button on front panel to the CPU board, which allows

users to turn on or off power supply.

System Reset Switch

Pin 11 and 12 connect the case-mounted reset switch that reboots your computer

without turning off the power switch. It is a better way to reboot your system for a longer

life of system power supply.

HDD Activity LED

This connection is linked to hard drive activity LED on the control panel. LED flashes

when HDD is being accessed. Pin 13 and 14 connect the hard disk drive to the front

panel HDD LED, pin 13 is assigned as cathode(-) and pin 14 is assigned as anode(+).

2.4.13 Digital I/O Connector (JP9)

The board is equipped with an 8-channel digital I/O connector that meets requirements

for a system customary automation control. The digital I/O can be configured to control

cash drawers and sense warning signals from an Uninterrupted Power System (UPS), or

perform store security control. You may use software programming to control these

digital signals.

Signal

DIO 8

DIO 1

DIO 7

DIO 2

DIO 6

DIO 3

DIO 5

DIO 4

GND