User Manual

AXIS P3384–V
Events
Events
The Axis product can be configured to perform actions when different events occur, for example, start a rec ording when motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rul e triggers and conditions include:
• Applications — use installed applications to trigger the rule, see Applications on page 31.
• Detectors
- Audio Detection — trigger the rule when audio is detected, see Audio D etection on page 30.
- Day/Night Mode — trigger the rule when the product switches between day mode (IR cut filter on) and night
mode (IR cut filter off). This can for example be used to control an external infrared (IR) light connected
to an output port.
- Motion Detection — trigger the rule when motion is detected, see Motion Detection on page 28.
- Tampering — trigger the rule when tampering is detected, see Camera Tampering on page 28.
• Hardware
- Fan — trigger the rule if the fan is malfunctioning. Thiscanforexamplebeusedtosendmaintenance
notifications.
- Network — trigger the rule if network connectio n is lost or restored. This can for example be used to start
recording to the SD card.
- Temperature — t rigge r the rule if the temperature falls outside or inside the operating range of the product. This
canforexamplebeusedtosendmaintenancenotifications.
• Input Signal
- Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see I/O
Ports on page 46.
- Manual Trigger — trigger the rule using the Manua
l Trigger button in the Live View page, see Controls on
the Live View Page on page 8 . This can for example be used to validate actions during product installation
and configuration.
• PTZ
- Moving — trigger the rule when the cam era view moves due to a PTZ operation. This can for example be used
as an additi onal co
ndition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a PTZ operation.
- Preset Reached —triggertherulewhenthecamerastopsatapresetposition.Thiscanbeforexamplebeused
with the Send Images action to upload images from the preset position.
•
Storage
- Available — trigger the rule when the storage device is unmounted or removed. This can for example be
used to send maintenance no tifications.
- Full — trigger the rule when the storage device is full. Under normal op eration, the oldest recordings will be
overwritten to prevent the storage device from becoming full.
- Locked —triggertheruleifthestoragedeviceislocked(writeprotected).
• System
32