Quick Installation Guide This guide covers the installation and basic setup procedures for the AXIS PrintPoint 140 BJC. If you need more detailed instructions, please refer to the AXIS PrintPoint 140 BJC User’s Manual. Physical Description LPT1 Printer Connector Ethernet 10baseT Connector External Power Supply Connector Test Button Network Indicator Power Indicator Installing AXIS PrintPoint 140 BJC You should proceed with the following instructions, as appropriate for your type of network.
NetWare NetWare By following the instructions detailed below, install your AXIS PrintPoint 140 BJC with the AXIS NetPilot™ Installation Wizard, supplied on the AXIS Utilities Diskette. Please note that AXIS NetPilot™ software requires a Windows platform that uses NetWare or NetBIOS/NetBEUI. 1. Load the AXIS NetPilot™ software by following the instructions on the label of the AXIS Utilities diskette. After loading the software, double-click on the AXIS NetPilot™ icon.
Windows Supplied on the AXIS Utilities diskette, the AXIS Print Monitor should be used for network printing within Windows 95 and Windows NT environments. It allows AXIS Network Print Servers to be connected in the same simple fashion as a local printer port and once installed, is automatically initialized upon system startup. The AXIS Print Utility for Windows is also supplied on the AXIS Utilities diskette and is the tool for network printing within Windows for Workgroups and Windows 3.1 environments.
8. Enter an appropriate name for your printer and click Next> 9. Choose whether you wish to produce a Test Page and then click Finish. Client-server printing: The AXIS Print Monitor is not needed on the client platforms for client-server printing. Windows 3.1 and Windows for Workgroups All Windows 3.1 and Windows for Workgroups users requiring access to a network printer in peer-to-peer mode, will need to install the AXIS Print Utility for Windows onto their workstations.
. Select a printer driver from the list of Installed Printers, or click Add>> to install a new driver. Click Connect... 7. Select the Windows port name defined in step 4 above that should now feature at the bottom of the Ports list. 8. Click OK to close the Connect dialog, and Close to close Printers. The setup is now completed and you can print through your AXIS PrintPoint 140 BJC. Important: Windows 3.
3. Select \PIPE\.LP1 from the Device list, then select a printer driver suitable for your printer. 4. Click Add, then click OK to confirm the printer definition. 5. Click Setup, then select Queues... 6. Click Add to create a print queue. Type a name in the Name field. 7. Click Add, then click OK to confirm the queue definition. Create a Print Queue (OS/2 version 2.x and OS/2 Warp): 1.
AXIS PrintPoint 140 BJC Quick Installation Guide Part No: 15624 Revision: 1.0 Date: September 1997 Copyright © Axis Communications AB, 1996-1997 Axis Communications URL: http://www.axis.
