Quick Installation Guide This guide covers the installation and basic setup procedures for your AXIS 200+. Should you require more detailed instructions, please refer to the AXIS 200+ User’s Manual available via the Axis WWW Home Page at http://www.axis.com/salessupport/manuals.html, or http://www.se.axis.com/products/documentation/manuals.
UNIX Type the following commands: arp -s temp ping Example: arp -s 192.168.3.191 00:40:8c:10:00:86 temp ping 192.168.3.191 6. Access the AXIS 200+ by entering its Internet address (URL) into the location field of your Web browser. Example: http://192.168.3.191/ 7. The AXIS 200+ is delivered in approximate focus position, with focus set to infinity. If you need to fine adjust to close focus, carefully turn the smaller lens.
To integrate live snapshot images into your own applications and web pages, refer to the target snapshot type as detailed below: Example: http://192.168.3.191/fullsize.jpg Example: ( Adding an HTML reference) 
The CRON Script The AXIS 200+ includes a CRON script service that facilitates periodic command execution. It allows you to program event and/or time triggered functions within the AXIS 200+.
Point to Point Protocol (PPP) PPP support allows you to use your AXIS 200+ remotely, just as if it were on your local network. Any PPP capable host can be used to dial into the AXIS 200+. PPP configuration for a Windows 95 host Please refer to the AXIS 200+ web pages should you wish to use PPP from another host, i.e. Windows NT or UNIX. Follow these instructions to configure PPP from a Windows 95 host: 1. Connect the remote modem to the serial port of the AXIS 200+ (US Robotics modem recommended). 2.
AXIS 200+ Quick Installation Guide Part No: 15846 Revision: 1.0, Date: February 1998 Copyright © Axis Communications AB, 1996-1998 Axis Communications URL:www.axis.
