User Guide

28
AXIS 213 PTZ
6. Adjust the Object size, History and Sensitivity profile sliders (see table below for details). Any
detected motion within an active window is then indicated by red peaks in the Activity window
(the active window has a red frame).
7. Click Save.
Please see the online help for descriptions of each available option.
High Only very large objects
trigger motion detection
An object that appears in the region
will trigger the motion detection for a
long period
Ordinary colored objects against ordi-
nary backgrounds will trigger the
motion detection
Low Even very small objects
trigger motion detection
An object that appears in the region
will trigger motion detection for only a
very short period
Only very bright objects against a dark
background will trigger motion detec
-
tion
Default val-
ues
Low Medium to High Medium to High
Examples:
• Avoid triggering on small objects in the image by selecting a high size level.
• To trigger motion detection as long as there is activity in the area, select a high history level.
• To only detect flashing light, low sensitivity can be selected. In other cases, a high sensitivity level is recommended.
Port Status
Under Event Configuration > Port Status there is a list that shows the status for the connected inputs and
outputs of the AXIS 213 PTZ for the benefit of the Operator who cannot access the System Options section.
Example: If the Normal state for a push button connected to an input is set to Inactive - as long as the button is not pushed, the state
is inactive. If the button is pushed, the state of the input changes to active.
If there are parts of the Include window that you wish to exclude, click the
Configure Excluded Windows radio button and repeat steps 1-8 above.
Parameter Size History Sensitivity