User's Manual

AXIS P5544 PTZ Dome Network Camera

Hardware Overview

6 8

Part number (P/N) & Serial number (S/N)

Network connector (PoE+)

Panopsis lens

Multi-connector

Control button

SD card slot

Status LED indicator

Restart button

Connectors

For technical speciﬁcations, see page 57.

Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet Plus (PoE+) IEEE 802.3at. Use the supplied midspan.

NOTICE

Due to local regulations or the environmental and electrical conditions in which the product is to be used, a s hielded network

cable (STP) may be ap propriate or required. Any network cables that are routed in outdoor environments or similar shall be

shielded (STP) and intended fo

rtheirspeciﬁc use. Make sure that the midspan is properly grounded. See Electromagnetic

Compatibility (EMC) for regulatory requirements.

SD card slot - A standard or high-capacity SD card (not included) can be used for local recording with removable storage.

NOTICE

To prevent corruption of recordings, the S D card should be unmounted before removal. To unmount, go to Setup > System

Options > Storage > SD Card and click Unmount.

Control b

utton - The control button is used for:

• ConnectingtoanAXISVideoHostingSystemservice.Seepage 42. To connect, p ress and hold the button for about

1 second until the Status LED ﬂashes green.