User's Manual

Page 8 AXIS Q87-E 230/120 V AC Installation Guide
4. Connect the pan/tilt power supply to the pan/tilt connector (6) in the power supply.
5. If using the day/night sensor, connect the illuminator cable to the illuminator connector (J5) in
the power supply.
6. If using the day/night sensor, adjust the potentiometer to increase or decrease the sensitivity of
the day/night sensor. see Connection Diagram, on page 9.
Connect the mains supply cable to the mains supply connector in the power supply.
7. Close the power supply and tighten the lid screws.
8. Screw the cable gland caps on firmly.
TR3
J3
F2
F1 L1 L2 K1
J4 J5
J6
P1
TR4
TR1
LN
J2
J1
TR2 24~ 24~
24~
24 VAC Supply
Incoming mains
24~
status
+-
LN
4 5
6
8 9
7
321
1Fuse F1
2Fuse F2
3 Potentiometer
4Mains supply connector
5 Mains supply cable
6 Pan/tilt connector
7 Pan/tilt power supply cable (24 V AC)
8 Illuminator connector
9 Illuminator cable