User's Manual

AXIS Q6035 PTZ Dome Network Camera

Video and Audio

• G726

Sample rate - The number of times per second the sound is sampled . A higher sample rate will provide better audio quality, but

also requi res a greater bandwidth.

Bit rate - Set the required bit rate depending on the selected encoding. A higher bit rate wil l give better audio quality. A lower bit

rate may have latency or delay, but will require less bandwidth.

For more information about these settings, please see the online h elp

Audio Output

An external speaker can be connected to the product’s Audio-out connector (a built-in ampliﬁer is required for this). The output can

be connected to another ampliﬁer with speakers. A stereo connector must be used for the audio out.

Conﬁgure the a udio ou tput settings under Video & Audio > Audio Settings.

Note

A multi-connector cable (available from Axis;

Multi-Connector Cable (sold separately)

) is required when connecting external

audio equipment to the Axis product.

Output gain - Control the volume (dB Full Scale) of the line audio output. If the sound is too low, choose a higher dB. If the

sound is too high, choose a lowe r dB.

Audio Clips

An audio clip is a sound ﬁle that can be played when events occur or directly from the Live View page. The audio clip must ﬁrst be

uploaded to the Axis product o r recorded by a microphone connected to the product.

To add, download, modify or remove audio clips, go to Video & Audio > Audio Clips.Form

ore information see the online help

To conﬁgure the Axis product to play audio clips when an event occurs, an acti

on rule must be set up. For more information, see

Events, on page 34

Note

Audio clips cannot be used if the product’s audio functionality is enabled. The audio functionality is enabled on the Audio

tab under Video & Audio > Video Stream.