INSTALLATION GUIDE AXIS M1004-W Network Camera
About this Document This document includes instructions for installing AXIS M1004-W on your network. Previous experience of networking will be beneficial when installing the product. Legal Considerations Video and audio surveillance can be prohibited by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes. This product includes one (1) H.264 decoder license. To purchase further licenses, contact your reseller.
installed according to the instructions and used in its intended environment. USA - This equipment has been tested using a shielded network cable (STP) and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This product complies with IC radiation exposure limits for an uncontrolled environment. Avoid operating this product at a distance less than 20 cm (7.9 in.) from the user.
Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and documentation without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
response. Learn More! Visit Axis learning center www.axis.com/academy for useful trainings, webinars, tutorials and guides. Warranty www.axis.com/warranty Contact Information Axis Communications AB Emdalavägen 14 223 69 Lund Sweden Tel: +46 46 272 18 00 Fax: +46 46 13 61 30 www.axis.
AXIS M1004-W 1x Page 7 1x 1x 1x 1x Camera owner authentication key The authentication key on this label is used to authenticate the owner/administrator of this Axis camera. The key is associated with the camera’s uniqu e serial number (S/N), as shown at the top of the label. The authentication key is used for registering the camera with an AVHS service provider for hosted video. For more information and help to find a local AVHS Service Provider, go to: http://www.axis.
Page 8 AXIS M1004-W 9 10 www.axis.
AXIS M1004-W Page 9 1 2 11
Page 10 AXIS M1004-W 3 <120 s 4
AXIS M1004-W Page 11 15 5 6
Page 12 7 8 AXIS M1004-W
AXIS M1004-W 9 Page 13
Page 14 10 AXIS M1004-W
AXIS M1004-W 11 1 Page 15
Installation Guide Ver.1.0 AXIS M1004-W Network Camera Printed: March 2013 © Axis Communications AB, 2013 Part No.