User's Manual

AXIS P1346–E Network Camera
Accessing the product
Click the Active/Inactive buttons to manually start and stop a connected device — e.g. s witch an external light
on and off.
The Manual Trigger button can trigger a n event directly from the Live View page. The button is configured under
Live View Config > Action Buttons.
Click Snapshot to save a s napshot of the video image. Right-click the v ideo image to save it in JPEG format on your
computer. This button is primarily intended for use when the AXIS M e d ia Control viewer toolbar is not available.
Enable this button from Live View Config > Action Buttons.
The Audio clip drop-down list allows you to play an audio clip from the Live View page. Select the audio
clip and click the Play button.
AXIS Media Control viewer toolbar
The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media C ontrol (AMC), on page 16 for more
information. The too lbar displ ays the following buttons:
The Play button connects to the Axis product and starts playing a media stream.
The Stop button stops the media stream.
The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specified
in the AMC Control Panel.
Click the View Full Screen button and the video ima ge will fill the entire screen. Press ESC (Escap e) on the computer
keyboard to cancel full screen view.
The Record button is used to record the current vide o st ream. The location where the recording is saved can be specified
in the AMC Control Panel.
AMC Audio controls
AMC audio buttons control the speakers and microphone connected to the client computer. The buttons are only visible when
audio is enabled.
Speaker button — Click to turn the speakers on or off.
Microphone button – C lick to mute or unmute the microphone. In Simplex - Network Camera speaker only mode,
click this button to s top sending audio to the product.
14