User's Manual

About this document
This manual is intended for administrators and users of the AXIS
P1346–E Network Camera, and is applicable to firmware 5.40 and later.
It includes instructions for using and managing the product on your
network. Previous experience of networking will be of use when using
this product. Some knowledge of UNIX or Linux-based systems may also
be beneficial, for developing sh ell scripts and applica ti o ns. La ter version
of this document will be po sted to the Axis website, as required. See
also the product’s onlin e help, available via the web-based interface.
Liability
Every care has been taken in the preparation of this manual. Please
inform your local Axis office of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to the
product and manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material contained
within this document, inclu ding, but not limited to, the implied
warranties of merchantability a nd fitness for a particular purpose. Axis
Communications AB shall not be liable nor responsible for incidental or
consequential damages in connection w ith the furnishing, performance
or use of this material. This product is on ly to be used for its intended
purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to technology embodied
in the product described in this document. In particular, and without
limitation, these intellectual property rights may include one or mo re
of the patents listed at http:/ /www.axis.com/pa tent.htm and one or
more additional patents or pending patent application s in the US and
other countries.
This product co ntains licensed third-party software. See the menu item
“About” in the product’s user in terface for more information.
This product contains source code copyright Apple Computer,
Inc.,underthetermsofApplePublicSourceLicense2.0(see
http://www.opensource.ap ple.com/apsl). The source code is available
from http://developer .apple.com/darwin/p rojects/bonjour/
Equipment Modifications
This equipment must be installed and u sed in strict accordan ce with the
instructions given in the user documentation. This equipment contains
no user-serviceable components. Unauthori zed equipment changes or
modifications will inva lida t e all applicable regulatory certifications
and approvals.
Trademark Acknowledgments
Apple, Boa, Bonjour, Ethernet, Internet Explorer, Linux , Microsoft,
Mozilla, Real, SMPTE, QuickTime, UN IX, Windows, Windows Vista and
WWW are registered trademarks of the respective holders. Java and
all Java-based trademarks and logos are trademarks or registered
trademarks of Oracle and/or its affiliates. UPnP
TM
is a certific
ation
mark of the UPnP
TM
Implementers Corporation.
Electromagnetic Compatibility (EMC)
This e quipment has been designed and tested t
ofulfill applicable
standards for:
• Radio frequency em ission when installed according to t he
instructions an d u sed in its intended environment.
• Immunity to electrical and electromagnetic phenomena whe n
installed according to the instructions and u sed in its inten ded
environment.
USA
Depending on the characteristics of the electrical environment, using
shielded cables (STP) ma y be a
ppropriate, in which c ase th e following
is applicabl e: This equipment has been tested using shielded ca bles
(STP) and found to comply with the limits for a Cla ss B digital device,
pursuant to part 15 of the F
CC Rules. These limits are designed
to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy
and, if not i nstalled and used in accordan ce
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a pa
rticular installat ion . If this equipment does
cause harmful interference to radio or television reception, w hi ch
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separatio n betwe en the equipment and receiver.
• Connect the equipment into an outlet on a circuit diffe rent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
Canada
This Class B digital apparatus complies w ith Cana d ian ICES-003.
Europe
This digital equipment fulfills the requireme nts for R F emission
according to the Class B limit of EN 5502 2.
This product fulfills the req uire ments for imm u nity according to
EN 61000-6-1 residential, commercial and light-industry environments.
This product fulfills the req uire ments for imm u nity according to
EN 61000-6-2 industrial environments.
This product fulfills the req uire ments for imm u nity according to
EN 55024 office and commercial environ ments.
Australia/New Zealand
This digital equipme nt fulfills the requiremen ts for RF emission
according to the Class B lim it of AS/NZS CISPR 22.
Korea
이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사
용하는것을목적으로하며, 모든 지역에서 사용할 수 있습니다.
Japan
この装置は、クラスB 情報技術装置です。この装置は、家庭
環境で使用することを目 的としていますが、この装置がラジ
オやテレビジョン受信機に近接して使用されると、 受信障
害を引き起こすことがあります。 取扱説明書に従って正し
い取り扱いをして下さい。
Safety
This product complies to EN/IEC 60950-1 and EN/IEC 60950-22, Safety
of Information Technology Equipment.
Support
Should you require any technical assistance, please contact your Axis
reseller. If your questions cannot be answered immediately, your
reseller will forward your queries through the appropriate c hannels to
ensure a rapid response. If you are connected to the Internet, you can:
• download user documentation and s oftware updates
• find answ ers to resolved problems in the FAQ database. Search
by product, category, or phrase
• report problems to Axis s upport staff by logging in to your private
support area
• chat with Axis support staff (selected countries only)
• visit Axis Support a t www.axis.com /techsup/
Learn More!
Visit Axis learning center www.axi s.c om /academ y fo r useful trainings,
webinars, tutorials and guid es.