User's Manual

AXIS P1346–E Network Camera

Events

• Day/Night Vision Mode —setdaymode(IRcutﬁlter on) or night mode (IR cut ﬁlter off).

• Output Port — activate an I/O port to control an external device.

• Play Audio Clip —seeAudio Clips, on page 27.

• PTZ Control

- Preset Position — go to a preset position.

- Guard Tour — start a guard tour, see Guard T our, on page 31.

• Record Video — record video to a selected storage.

• Send Images —sendimagestoarecipient.

• Send Notiﬁcations —sendanotiﬁcatio n message to a recipient.

Convert Event Type s to Action Rules

If the Axis product is upgraded to ﬁrmware version 5.40 or later, it is recom mended to convert Event Types to Action Rules.The

legacy user Event Types in the camera w ill continue to work but will not be visible in the user interface of the camera. The Event

Types need to be converted to Action rules to become visible in the user interface.

To convert Event Types to Action Rules go to Events > Action Rules and click Convert.

Caution

This is not recomm ende d when using a VMS based on the old Event Management System.

Setting Up an Action Rule

An action rule deﬁnes the conditions that must be met for the product to perform an action, for example record video or send email

notiﬁcations. If multiple conditions are deﬁ ned, all must be m

et to trigger the action.

The following example describes how to set up an action

rule to record video to a network share if there is movement in the

camera’s ﬁeld o f view.

Set up motion detection and a dd a network share:

1. Go to Detectors > Motion Detection and conﬁgure a mo tion detection window, see page 33

2. Go to System Options > Storage and set up the network share, see page 49.

Set up the action rule:

1. Go to Events > Action Rules and click Add.

2. Select Enable rule and enter a descriptive name for the rule.

3. Select Detectors from the Trigger drop-down list.

4. Select Motion Detection from the drop-down list. Select the motion detection window to use.

5. Optionally, select a Schedule and Additional conditions,seebelow.

6. Under Actions, select Record Video from t he Type drop-down list.

7. Select a Stream proﬁle and conﬁgure the Duration settings as described below.

8. Select Network Share from the Storage drop-down list.