User's Manual

AXIS P1346 Network Camera
Accessing the product
Use the slider to control the volume of the speakers and the microphone.
Half-duplex mode
The Talk/Listen button is used to switch between sending and receiving audio. The button can be configured
from the A udio tab in the AMC Control panel:
• Push-To-Talk mode: Click and ho ld the button to talk/send. Release the button to listen.
• Toggle mode: Click o nce to switch between talking and listening.
Simplex – Network Camera speaker only mode
To send audio, the Talk and Micro phone buttons must both be enabled. Click either button to stop audio
transmission.
PTZ Controls
The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/ disable controls for specified users under
System Options > Security > Users.
Note
These controls are ava ilable if digital PTZ is ena bled in the selected v iew area, see View Areas, on page 23.
Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the
mouse pointer.
Click the Center mode button and click in the image to center the camera view on that p osition. The center mode
button could also be used to zoom in on a specific area. Click in the image a nd drag to draw a rectangle surrounding
theareatobemagnified. To zoom out, rotate the mouse wheel.
Click the Ctrl panel button to open the PTZ control panel w hich provides ad ditional PTZ controls.
User-defined buttons can also appear in the Control panel. See Controls, on page 30.
To view a specific vie w area or preset position, select the view are a or preset position from the
Source list.
Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on a position on the bar to ste er the
camera view to that position.
Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position.
The PTZ controls can be disabled under PTZ > Advanced > Controls,seeControls, on page 30.
14