User's Manual

AXIS P5532 PTZ Dome Network Camera

Video and Audio

Bit rate - Set the required bit rate depending on the selected encoding. A higher bit ra te will give better audio quality. A lower bi t

rate may have latency or delay, but will require less bandwidth.

For more information about these settings, please see the online help

Audio Output

An external speaker can be connected to the product’s Audio-out connector. The output can be used with high impedance

headphones or connected to another ampliﬁer with speakers.

Conﬁgure the audio output settings under Video & Audio > Audio Settings.

Note

A m ulti-connector cable (available from Axis; Mu lti-Connector Cable (sold separately)) is required when connecting external

audio equipment to the Axis product.

Output gain - Control the volume (dB Full S cale) of the line audio output. If the sound is too low, choose a higher dB. If the

sound is too high, choose a lower dB.

Audio Clips

An audio clip is a sound ﬁle that can be played either when an event occurs or manually from the Live View page. Audio clips can

be uploaded to the product or recorded by a microphone connected to the product.

You can add, play, download, modify and remove audio clips from Video & Audio > Audio Clips. For more information see the

online help

Note

Audio clips cannot be used if the prod uct’s aud io functionality is e nabled. The audio functionality is enabled on the Audio

tab under Video & Audio > Video Stream.