User's Manual

AXIS P5532 PTZ Dome Network Camera

Detectors

Motion Detection

Motiondetectionisusedtogenerateanalarmwhenevermovementoccurs(orstops)intheview.Upto10IncludeandExclude

windows can be co n ﬁgured:

• Include windows — target speciﬁc areas within the whole video image

• Exclude windows —deﬁne areas within an Include window that should be ignored (areas outside Include windows

are automatically ignored)

Once conﬁgured, motion detection windows appear in the list of Detec tors in Action rule setup. S ee Setting Up an Action Rule, on

page 32.

Note

Using the motion detection feature may decrease the product’s overal l performance.

Set up motion detection

To set up a motion detecti on Include Window, follow these ins tructions:

1. Go to Detectors > Motion Detection.

2. Select the Conﬁgure Included Windows option and click New. Select the new window in the list of windows and enter

adescriptivename.

3. Adjust the size (drag the b ottom r ight-hand corner) and the position (click on the text at the top and drag to the desired

position) o f the active window (window with red frame ).

4. Adjust the Object Size, History and Sensitivity proﬁle sliders (s ee Motion detection parameters for details). Any detected

motion within an active window is indicated by red peaks in the Activity window.

5. Click Save.

To exclude parts of the include window, select the Conﬁgure Excluded Windows and position the exclude window within the

include window.

To delete an include or exclude window, s elect the window in the list of windows and click Del.

Motion detection parameters

The parameters controlling motion detection are described in the table below: