User's Manual

AXIS P5532 PTZ Dome Network Camera

Hardware overview

Part number (P/N) & Serial numb er (S/N)

Network connector (High PoE)

Multi-connector

Control button

SD memory card slot

Status LED indicator

Restart button

Connectors

Network connector - RJ-45 Ethernet connector. Sup ports Power over Ethernet Plus (PoE+) IEEE 802.3at. Use the supplied midspan.

Caution

Due to local regulations o r the environmental

and electrical conditions i n which the produ ct is to be used, a s hielded networ k

cable (STP) may be appropriate or required. Any network cables that are routed in outdoor enviro nments or similar s hall be

shielded (STP) and intended for their speciﬁc use. Make sure that the midspan is properly grounded. See Electromagnetic

Compatibility (EMC) for regula

tory requirements.

SD card slot - A standard or high-capacity SD card (not included) can be used for local recording with removable storage. For

instructions on how to insert and remove an SD card, please r efer to the Installation Guide.

Note

Before removal, the SD card should be unmounted to prevent corruption of recordings. To unmount the SD card, go to Setup

>SystemOptions>Storage>SDCardand click Unmount.

Control but

ton - The control button is used for:

• ConnectingtoanAXISVideoHostingSystemservice.Seepage 40. To connect, press and hold the button for about

1 second until the Status LED ﬂashes green.