User's Manual

AXIS Q1602 Network Camera
Events
Events
The Axis product can be configured to perform actions when diffe rent events occur, for e xa m ple , start a recording w h e n motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
• Applications — use ins talle d applications to trigger the rule, se e
Applications, on page 29 .
• Detectors
- Audio Detection — trigger the rule wh en audio is detected, see
Audio Detection, on page 28 .
- Motion Detection — trigger the rule w hen motion is detected, see
Motion Detection, on page 26 .
- Tampering — trigger the rule wh en tampering is dete c ted, see
Camera Tampering, on page 26 .
• Hardware
- Network — trigger the rule if network connection is lost or restored. This can for exam ple be used to start
recording to the SD card.
• Input Signal
- Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see
I/O
Ports, on page 42
.
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see
Controls on the
Live View Page, on page 10
. This c a n for example be used to valida te actions during product installation
and configuration.
• Storage
- Available — trigger the rule when the storage device is unmounted or removed. This can for example be
used to send maintenance notificatio ns.
- Full — tr igger the rule wh e n the storage device is full . Und er normal op era tion, the oldest recordings will be
overwritten to prevent the storage device from b
ecoming full.
- Locked —triggertheruleifthe
storagedeviceislocked(writeprotected).
• System
- System Initializi
ng — trigge r the rule when the product is being started. This can for example be used to send a
notification when the product restarts.
• Time
- Recurrence — trigger the rule periodically, see
Recurrences, on page 32 . This can for example be used to
upload an im age every 5 minutes.
- Use Schedule — trigger the rule according to the s elected schedule, see
Schedules, on page 32 .
Available actions include:
• Day/Night Vision Mode —setdaymode(IRcutfilter on) or n ight mode (IR cut filter off).
• Output Port — activate an I/O port to control an external device.
• Play Audio Clip —see
Audio Clips, on page 21 .
• Record Video — record video to a selected storage.
• Send Images —sendimagestoarecipient.
30