User's Manual

AXIS Q1602 Network Camera
Hardware Overview
Replacing the le ns
It is possible to use optional lenses fo r the Axis product.
To replace the lens:
1. Disconnect the iris cable.
2. Unscrew the standard lens.
3. Attach and screw on the new lens.
Note
There is no need to restart the Axis product after changing the lens. H owever, the product must be restarted if you are
interchanging between a P-iris, DC-Iris or fixed/manual iris lens. In order to set the focus and position the lens, the Axis
product must be connected to the network.
To change the iris configuration:
1. Go to Setup > Video and Audio > Camera Settings. Iris con figuration shows the current configured iris type.
2. Click Edit.
3. Select the installed iris lens from the drop-down list and click OK.
Note
For iris lenses not listed in the dro p-dow n list, d ownload the iris configuration fi l e from www.ax is.com
To upload and use the d ownloaded configuration file , click the Upload tab. Click Browse and select the configuration
file. Cl ick Upload. The installed iris lens should now be included in the Iris Selection drop-down list, select it and press
OK. If you select a DC iris configuration file for a P-iris lens, an e rror mes sage wil l appear below the iris configuration
type in the Camera Settings page.
7