User's Manual

Management and Configuration
88 AXIS 5500 / AXIS 5550 User’s Manual
Section 10 Management and Configuration
The management and configuration tools that are supported by the Axis
Network Print Server allow you to:
• Change the print server parameters, i.e. editing the
config file
• Receive extended information about the print jobs
• Receive printer port status
• Monitor your printers
• Reset the Axis Network Print Server
Configuration
Overview
The method you should use to manage and configure your Axis Network
Print Server depends on the operating system protocols of your network.
The table below displays which method to use for each supported
environment.
Using a Web browser for Print Server Management
Once you have established the Axis Network Print Server in the TCP/IP
environment, as described in “Assigning an IP Address to the Print
Server” on page 15, you are free to access the Axis Network Print Server
Web pages from any standard Web browser.
The Web interface of the Axis Network Print Server is divided into two
modes of operation, User mode and Admin mode:
User In User mode you can change language, but you have no rights to change
any other parameters. However, if you have access rights to the Admin
mode, you can change some of the basic parameters from User mode via
the Configuration Wizard. This mode is intended for regular users who are
only interested in using the print server's interface for checking print jobs
or viewing printer properties. If you want to change any other of the print
server's settings, you must enter the Admin mode.
Environments Configuration/Management methods
TCP/IP
(UNIX/Linux, Windows. Mac OS)
Web Browser - See page 88
AXIS ThinWizard - See page 92
FTP - See page 94
Telnet - See page 96
SNMP - See page 98
IPX/SPX
(NetWare)
Novell Utilities - See page 99
NetBIOS/NetBEUI
(Windows)
Web Browser - See page 88
AppleTalk
Web Browser - See page 88
AppleTalk_cfg method - See page 42
Mac-FTP - See page 94