User's Manual

Axis STS Network Camera Installation Guide Page 3
Axis STS Network Camera
Installation Guide
This installation guide provides instructions for installing your Axis STS Network Camera. The
models covered by this guide are:
• AXIS M1011 STS
• AXIS M1011-W STS
• AXIS M1031-W STS
For more information on using your camera, please visit your operator’s web portal.
Installation steps
1. Check the package contents against the list below.
2. Study the overview for your camera.
3. Mount the camera and connect the cables.
4. Register the camera at your operator’s web portal.
5. Configure the wireless connection (wireless models
only).
Package contents
Item Models/variants/notes
Network Camera AXIS M1011 STS
AXIS M1011-W STS
AXIS M1031-W STS
Indoor power supply
(country specific)
PS-H or PS-V
Europe, UK, USA/Japan, Australia, Korea, Argentina, China
Power supply extension cable 1.8m (for PS-H only)
Network cable 1m (3.2 ft)
Camera stand Including fitted extension section and 4 mounting screws/plugs
Flexible clamp For shelf mounting
Printed Materials Axis STS Network Camera Installation Guide (this document)
Axis Warranty Document
Owner Authentication Key document
Important!
This product must be used in
compliance with local laws and
regulations.