User's Manual

Axis STS Network Camera Installation Guide Page 7
Register the camera at your operator’s web portal
If your operator gave you specific instructions on how to register your camera, you should now
follow those instructions. The steps and illustrations below are examples only and may differ from
those provided by your operator.
1. Open a browser (e.g. Internet Explorer) and visit your operator’s web portal, as in the example
below.
2. If you do not already have an account, click on the appropriate link, which might be named e.g.
“Create new account” or something similar.
3. Enter any information requested, as well as the camera’s serial number and the “Owner
authentication key”, which can be found on the document supplied with the camera.
4. Accept the terms of the service and click on “Register” or similar.
After registration is complete, live images from your camera should be available within a few
seconds. Note that the various features, settings, links etc., available in your account all depend on
the subscription you have with your operator - some features might not be available.
Notes: •If using Internet Explorer, you may need to approve the automatic installation of AMC (AXIS
Media Control), which allows viewing of the video stream. You will need administrator rights
on the computer to do this.
•The document “Camera owner authentication key” contains a unique code that is associated
with your camera. This code must be specified every time the camera is registered or
unregistered, and should therefore be kept in a safe place.