User's Manual

AXIS M1043–W Network Camera
Accessing the product
Note
• The default administrator user name root is permanent and cannot be deleted.
• If the password for root is lost, the product must be reset to the factory default settings. See
Reset to factory default
settings, on page 49
.
Set Power Line Frequency
Power line frequency is set the first time the Axis product is accessed and c an only be changed from Plain Config or by resetting the
product to factory default.
Select the power line f requency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may cause
image flickeriftheproductisusedinfluorescent light environments.
When using 50 Hz, the maximum fram e rate is limited to 25 fps.
Note
Power line frequency is different in different geographic regions. In the Americas, 60 Hz is u s u ally used; most other parts of
the world use 50 Hz. Local variations may apply, always check with the local authorities.
The Live View page
If the Axis product has been customized to meet specific requirements, not all the items de s cr ibe d below will appear in the Live View
page. The following provides an
overview of each available button.
Controls on the L ive View page
The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile . Stream
profiles are configured u
nder Video & Audio > Stream Profiles.See
Stream Profiles, on page 18 .
Click Pulse to activate the built-in light for a defined period of time, for example 20 seconds.
10