User's Manual

AXIS M1043–W Network Camera

Accessing the product

Use the slider to control the volume of the speakers and the microphone.

Half-duplex mode

The Talk/Listen button is used to switch between sending and receiving audio. The button can be conﬁgured

from the Audio tab in the AMC Control panel:

• Push-To-Talk mode: Click and hold the button to talk/send. Release the button to listen.

• Toggle mode: Click once to switch between talking and liste ning.

Simplex – Network Camera speaker only mode

To send audio, the Talk and Micro phone buttons must both be enabled. Click either button to stop audio

transmission.

PTZ Controls

The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for speciﬁed users under

System Options > Security > Users.

Note

These controls are available if digital PTZ is enabled in the selected view area, se e

View Area, on page 19

Click the Emulate joystick mode button and click in the image to mo ve the camera view in the direction of the

mouse pointer.

Click the Center mode button and click in the image to center the camera view on that positio n. The center mode

button could also be used to zoom in on a speciﬁc area. Click in the image and drag to draw a rectangle surrounding

theareatobemagniﬁed. To zoom out, rotate the mouse wheel.

Click the Ctrl panel button to open t he PTZ control panel which provides additional PTZ controls.

User-deﬁned buttons can also appear in the Control panel. See

Controls, on page 26

Select a PTZ preset position to steer the camera view to the saved position. See

Preset Positions,

on page 25

Pan and Tilt bars – Use the arrows to p an and tilt the camera view , or click on a position on t he bar to steer the

camera view to that position.

Zoom bar – Use the arrows to zoom in and out, or click on a positi

on on the bar to zoom to that position.

The PTZ controls can be disable

d under PTZ > Advanced > Controls,see

Controls, on page 26