User's Manual

About this document
This manual is intended for administrators and users of AXIS M1043–W
Network Camera, and is applicable to firmware 5.40 and later. It
includes instructions fo r using and managing the product on your
network. Previous experience of networking will be of use when using
this product. Some knowledge of UNIX or Linux-based systems may also
be beneficial, for developing shell s cripts an d applications . Later version
of this document will be posted to the Axis website, as required. See
also the product ’s online help, available via the web-based in terface.
Liability
Every care has been taken in the preparation of this manual. Please
inform your local Axis office of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to the
product and m anuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material contained
within this docum e nt, inc luding, but not limited to, th e implied
warranties of merchantability and fitness for a particular purpo se. Axis
Communications AB shall not be liable nor responsible for incidental or
consequential damages in connection with the furnishing, performance
or use of this material. This product is only to be used for its inte nded
purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to technology embodied
in the product described in this document. In particular, and without
limitation, these intel lectual property rights m a y include one or more
of th e pate nts liste d at http://www.axis.com/pa tent.htm and one or
more additional patents or pending patent applications in the U S and
other countries.
This product contains licensed t hird-party software. See the menu item
“About” in the product’s user interface for more information.
This product contains source code copyright Apple Computer,
Inc.,underthetermsofApplePublicSourceLicense2.0(see
http://www.opensource.ap ple.com/apsl). The source code is available
from http://developer.apple.com/darwin/projects/bonjour/
Equipment Modifications
This equipm ent must be installed and used in strict accordance with the
instructions given in the user documentation. This equipment contains
no user-serviceable components. Unauthorized e quipment changes or
modifications will invalidate all applicable regulatory certifications
and approvals.
Trademark Acknowledgments
Apple, Boa, Bonjour, Ethernet, Int ernet Explorer, Linux, Microsoft,
Mozilla, Real, SMPTE, QuickTime, UN IX, Windows, Windows Vista and
WWW are registered trademarks of the respective holders. Java and
all Java-based trademarks and logos are trademarks or registered
trademarks of Oracle and/or its affiliate s. UPnP
TM
is a certific
ation
mark of the UPnP
TM
Implementers Corporation.
WPA, WPA2 and Wi-Fi Pro tecte d Setup are marks of the Wi-Fi Allian ce.
Electromagnetic Compatibility (EMC)
This equipment has been designed and tested to fulfill applicable
standards for:
• Radio frequency emiss ion when installed a
ccordingtothe
instructions and used in its int e n d ed environment.
• Immunity to electrical and electromagnetic phenomena when
installed according to the inst ructio
nsandusedinitsintended
environment.
USA
Depending on the characteristics of the electrical environm ent, using
shielded cables (STP) may be appropriate, in which case the following
is applicable: This equipment has been tested us ing shielded cables
(STP) and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interfere nce
will not occur in a particular installation. If this equipment does
cause harmful interferenc e to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the i nterference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation b etwe en the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that t o which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
Canada
This Class B digital apparatus complies with C anadian ICES-0 0 3.
Europe
This digital equipment fulfills the requirements for RF emission
according to the Class B limit of EN 55022.
This product fulfills the requirements for immunity according to
EN 61000-6-1 residential, commercial and light-industry environments.
This product fulfills the requirements for immunity according to
EN 61000-6-2 industrial environments.
This product fulfills the requirements for immunity according to
EN 55024 office and commercial environments.
Australia/New Zealand
This digital equipment fulfills the requirements for RF emission
according to the Class B limit of AS/NZS CISPR 22.
Korea
이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사
용하는것을목적으로하며, 모든 지역에서 사용할 수 있습니다.
Japan
この装置は、クラスB 情報技術装置です。この装置は、家庭
環境で使用することを目 的としていますが、この装置がラジ
オやテレビジョン受信機に近接して使用されると、 受信障
害を引き起こすことがあります。 取扱説明書に従って正し
い取り扱いをして下さい。
Radio Transmission Regulatory Information
This equipment may generate or use radio frequency energy. Changes or
modificationstothisequipmentmaycause harm ful interference unless
the modifications are expressly approved in the user documentation.
The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
USA
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesirable operation.
This product complies with FCC radiation exposure limits for an
uncontrolled environment. Avoid ope rating this product at a distance
less than 20 cm from the user.
Canada
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1)
this device may n ot cause interference, and (2) this device must accept
any interference, including interference that may cause undesired
operation of the device.
This product complies with IC radiation exposure limits for an
uncontrolled environment. Avoid operating this product a
tadistance
less than 20 cm from the user.
Brazil
Este produto está homologad o pela ANAT EL, de ac
ordo com os
procedimentos regulamentados pela Resolução 242/2000 e atende
aos re quisitos técnicos aplicados.
Este equipamento opera em caráter secundário, isto é, não te m direito
a proteção contra interferência prejudicial, mesmo de estações do
mesmo tipo, e não pode causar interferência a sistemas operando em
caráter primário.
Para maiores informações, consulte o site da AN ATEL www.anatel.gov.b r
Europe